[avrdude-dev] stk500 (1.14)

[Theodore A. Roth]

On Tue, 4 Mar 2003, Brian Dean wrote:

:)Ok - that was completely wrong.  Turns out that this is supported just
:)fine, and the real problem was that I was just not waiting long enough
:)for a response from the STK500 after issuing the "program page"
:)command.  Non-paged (non-ATmega) parts seem to program slower than
:)paged parts, and while I never ran into this while testing with my
:)ATmega128, programming a whole page size full on the 8515 was taking
:)longer than the 0.5 second timeout I was giving for the STK500 to
:)acknowledge a command.
:)
:)Anyway, I dropped the page size from 256 to 128 for non-paged parts,
:)and increased the timeout to 5 seconds.
:)
:)All's well again.
:)
:)Ted, if you could please try your 1.14 firmware again after updating,
:)that'd be great.

Works fine now. Tested with 8515 and m128.

BTW: I figured why the m128 failed last night: I forgot to remove the 8515 
when I put the stk501 board on. Chalk that one up to fatigue. ;-)

Ted