Re: [Paparazzi-devel] Unit Test/Start-up Procedure for Paparazzi?

[Felix Ruess]

Hi,

I agree with Chris that putting something like that on a switch is probably not a good idea.

But it would be nice to have something to help you to go through the pre-flight check!

Although that e.g. wouldn't help you if you changed the control gains to potentially very wrong values, etc...

Regarding the existing test targets/code: they were mostly written to test the actual hardware or some software drivers in isolation of the rest of the firmware. E.g. test if the imu is reading data as expected, telemetry is working, etc.

Additional input on possible pre-flight checks/routines or new unit tests, etc. are certainly welcome!

Cheers, Felix

On Fri, Feb 17, 2012 at 3:11 AM, Chris Gough <address@hidden> wrote:

That sounds like a "now crash" switch, I don't normally want one of
those on my transmitter :)

In one project we use a (python) pre-flight test-suite on the
ground-segment. It's purpose is to streamline and make reliable the
"bring-up procedure" for a plane that still takes ~1 hour to set up.
It might be a usefull post-maintenance check too, that hasn't come up
yet...

Chris Gough

On Fri, Feb 17, 2012 at 12:27 PM, Chris Wozny <address@hidden> wrote:
> All,
>
> I noticed there being a section entitled test programs in some
> airframes firmware section. What exactly is this capable of? If I were
> to flick a switch on the transmitter I'd like to have it run through a
> pre-flight procedure such as deflect the servos as if it were
> receiving commands like PITCH(35 deg), hold for 2 seconds, ROLL(-15
> deg), hold for 2 seconds, and finally YAW(-20 deg), hold for 2
> seconds, then YAW(20 deg). I think this could be useful as a way to
> make sure any changes you've made in the airframe didn't significantly
> change anything it wasn't supposed to.
>
> Best,
> Chris
> --
> Chris Wozny
> University of Arizona MAV
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

--

.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel