On 28 March 2014 10:33, Gautier Hattenberger
<address@hidden> wrote:
The telemetry mode can be changed during flight in the settings tab, but the
define has to be added to the airframe file indeed (in the firmware section
for instance).
The observation I made from your log are matching the observation I made
during my own flight, so we definitely need to correctly reject outliers in
the sonar measurements.
I was looking at old logs, and they don't have sonar in them - I guess
this has been added relatively recently? Given how unreliable the data
is, not sure how useful it is.
Also, how sure are we that if I apply the thresholds it'll behave itself?
Le 28/03/2014 11:07, Ben Laurie a écrit :
On 27 March 2014 20:58, Gautier Hattenberger
<address@hidden> wrote:
baro_qfe is the reference pressure, so it only moves when the ins is
reseted.
You should have the baro pressure in BARO_RAW message if you change
telemetry mode to raw_sensors. You can also add <define
name="DEBUG_VFF_EXTENDED"/> to enable VFF_EXTENDED message. 'measure1' is
the sonar and 'measure2' is the baro.
You mean change it before flying, I presume? So this observation is
from your own ardrone2. not from my log?
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel