[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] NMEA GPS Support in Paparazzi Code-base
From: |
Andre Devitt |
Subject: |
Re: [Paparazzi-devel] NMEA GPS Support in Paparazzi Code-base |
Date: |
Wed, 1 Feb 2012 14:25:25 -0500 |
I'd tend to agree. There's lots of additional information that comes
out through the ublox binary protocol (solution accuracy) as well that
is not present in the standard NMEA messages.
Andre.
On Wed, Feb 1, 2012 at 2:02 PM, Felix Ruess <address@hidden> wrote:
> Hi Jake,
>
> short answer: NMEA sucks (at least imho).
> Also the ublox GPS are quite nice and parsing a binary protocol is
> always more efficient than parsing NMEA strings...
> You can also configure the ublox GPS via the binary protocol at
> startup from the ap.
>
> Not sure what you mean by basic GPS interface. The interface is the
> same for all GPS drivers... ublox is just the most commonly used one..
>
> That being said, of course it would be nice to have a properly tested
> and complete NMEA driver...
>
> Cheers, Felix
>
> On Wed, Feb 1, 2012 at 7:53 PM, Jake Stewart <address@hidden> wrote:
>> Chris, you might want to check out the Fastrax UP501 GPS module. It uses
>> the same mediatek chipset and has better specs for everything I checked.
>> It's also $28 (Mouser) instead of $60 (SparkFun). I couldn't find any
>> normal electronics distributors carrying the LS20031, so that is maybe a red
>> flag in some ways.
>>
>> I've got a UP501 and it seems to work well (limited testing only). I'll be
>> working on getting that running also, so we could share efforts. I was
>> really surprised to see that PPZ doesn't normally support standard GPS.
>> Anyone know why an oddball protocol was chosen as the basic GPS interface?
>>
>>
>> -Jake
>>
>>
>>> ----- Original Message -----
>>> From: Chris Wozny
>>> Sent: 02/01/12 08:44 AM
>>> To: address@hidden
>>> Subject: [Paparazzi-devel] NMEA GPS Support in Paparazzi Code-base
>>>
>>> All,
>>>
>>> After having searched through the mailing list, it looks like some
>>> work was done on adding an NMEA parser to the guidance code. I was
>>> wondering the status of this since I emailed the original inquirer and
>>> he told me that he never followed up on his attempt to try it. I'm
>>> looking to use the LS20031 GPS receiver (from Sparkfun) with the
>>> Lisa/M autopilot. It operates at 57600 bps with a TTL serial interface
>>> just in case anyone is wondering. Has anyone used the NMEA parser in
>>> flight yet?
>>>
>>> Best,
>>> Chris
>>>
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel