paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] NMEA GPS Support in Paparazzi Code-base


From: Felix Ruess
Subject: Re: [Paparazzi-devel] NMEA GPS Support in Paparazzi Code-base
Date: Wed, 1 Feb 2012 18:25:57 +0100

Hi Andre,

did you use the current version in paparazzi master?
Or your original code from https://github.com/paparazzi/paparazzi/pull/54 ?

https://github.com/paparazzi/paparazzi/issues/120

Cheers, Felix

On Wed, Feb 1, 2012 at 5:56 PM, Andre Devitt <address@hidden> wrote:
> Yes we've used the nmea parser in flight. Think there is still some
> room for optimization of the code but it works fine. We've flown it
> using a mediaTek GPS chipset (IIRC it was the 3329, can check if
> necessary).
>
> Andre.
>
> On Wed, Feb 1, 2012 at 11:44 AM, Chris Wozny <address@hidden> wrote:
>> All,
>>
>> After having searched through the mailing list, it looks like some
>> work was done on adding an NMEA parser to the guidance code. I was
>> wondering the status of this since I emailed the original inquirer and
>> he told me that he never followed up on his attempt to try it. I'm
>> looking to use the LS20031 GPS receiver (from Sparkfun) with the
>> Lisa/M autopilot. It operates at 57600 bps with a TTL serial interface
>> just in case anyone is wondering. Has anyone used the NMEA parser in
>> flight yet?
>>
>> Best,
>> Chris
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]