Re: [Paparazzi-devel] GPS receiver GS407

[Chris]

I am afraid until i get a copy of the ublox chip's manual (which i 
already requested from ublox)
there nothing i can do, maybe someone already has the manual?
It is very likely that the changed the protocol a bit but enough not to 
work with the ublox module.
When i get it i will contact you again with a solution hopefully.
Chris


On 02/03/2013 07:00 PM, address@hidden wrote:
> I have some experience with the old lea4 series and a small batterie connected 
> to it - this was awful since it led to situations standing on the field 
> everything ready to go and no GPS link:-(  the power consumption was much 
> higher that expected. so you have to disassemble everything to connect an ftdi 
> ship to the autopilot because the default bautrate of the gps is 9600 and your 
> modem would probably be setup with a much higher rate -  you cant use the 
> tunnel combined with the modems if you have to change the baudrate in between 
> ... never ending story...
> having it programmed by the autopilot would be at least one issue less to take 
> care of. (I guess thats why we have this module?)
> so from my side - PLEASE HELP!
>
> if there is anything I can do/test to help let me know