Re: [Paparazzi-devel] Eagletree airspeed sensor problems

[Tobias]

twog+Airspeed_ETS+Baro_ETS+Aspirin1 (USE_AIRSPEED, USE_BARO_ETS)

(all on the same bus) works fine and I flew really a lot during the past - 
never the less at some point something was changed or fixed so that for the 
stable versions v4.2 and v4.1 
both eagle tree sensors dont start up after a restart of the twog - (sensors 
are powered from the twog) the imu (Aspirin on the same bus) however is not 
affected at all! so for measurement it is not even an risk of flying.
after flashing everything is still working as expected and I made a few nice 
flights during november.

Just a guess, but maybe a short delay on startup before initializing the 
sensors could do the job - just give those little guys a little time after they 
are powered. 

Tobi