Re: [Paparazzi-devel] Eagletree airspeed sensor problems

[Eduardo lavratti]

This is my planes. All with airspeed_Ets.
Plane1: YAPA2 + Airspeed_ETS + mpu6000 + ms5611 + camera controller (atmega8).
Plane2: TWOG + Airspeed_ETS + l3g4200 + hmc5883 + bmp050 .
Plane3: TWOG + Airspeed_ETS + itg3200 + hmc5883 + bmp050.

Some time with original drive the airspeed not initialize then i modified airspeed driver to wait some time to initialize.
This problem occur with all ppz versions.

---

Date: Mon, 21 Jan 2013 21:30:28 -0700
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] Eagletree airspeed sensor problems

Hello,

I was just wondering what sort of configurations people are definitely having problems with? What other devices are on the bus? Would be nice to have a clear and comprehensive list of what works and what doesn't and what the symptoms are...

I have been using an ETS airspeed sensor with Lisa/M v2.0 on I2C2 (no baro running) with aspirin 2.1, with absolutely no problems at all that I can detect. Of course, I don't think anything else is on this bus. (Last run on v4.1.1_testing-11-ga0fbe08 in my scdwyer git repo).

Thanks,

-Stephen Dwyer

On Mon, Jan 21, 2013 at 11:40 AM, Gerard Toonstra <address@hidden> wrote:

I've got two here and want to use them too. I've got a buspirate, which allows me to test various things quite easily over a console.

Tomorrow I'm away, but wednesday I should be able to have a look there.

G>

On Jan 21, 2013, at 3:06 PM, Felix Ruess <address@hidden> wrote:

Hi Tilman,

I have to admit, I don't quite understand the problem. I used to get values with this module (never flew it though)
Did it break or was it broken all the time? I thought this module was rather widely used.
That somehow never got quite clear from following the thread.

I really don't know, as I never used one myself... But it seems to me that it might have worked in old versions purely by chance (e.g. because some things added a fixed busy wait at initialization or something along these lines).

The point is that we don't really know what the startup requirements for this sensor are... other standard I2C sensors are working fine.

Cheers, Felix

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel