Re: [Paparazzi-devel] Eagletree airspeed sensor problems

[Tobias]

They are all on the same bus (same I2C, same wires, same connector) and the 
Aspirin is completely unaffected of the Eagle tree issue.
So to make an example
if I flash the twog and dont disconnect the power suply.  All sensors (IMU, 
Airspeed and Baro) are working as expected. Repowering the twog (and the 
sensors, they are powered by the twog) and here we go - the IMU is working just 
fine just the two eagle tree sensors dont.
Hope that clarifies the question - 
Would be nice to solve this issue, the eagle tree sensors are a good start and 
they do there job. 

Tobi