paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Airspeed sensor on Lisa/L


From: antoine drouin
Subject: Re: [Paparazzi-devel] Airspeed sensor on Lisa/L
Date: Fri, 10 Feb 2012 16:19:23 +0100

last question, why make this a module? is there a use case when your
board has a baro but you want to disable it?

On Fri, Feb 10, 2012 at 4:13 PM, Felix Ruess <address@hidden> wrote:
> Ah, thx Antoine!
>
> USE_I2C2 was indeed missing for that module when used with
> fixedwings. Committed to master and dev..
>
> For rotorcrafts the module is not needed (and the needed defines set for the
> boards) as this is already included in rotorcraft.makefile.
> We should probably try to harmonize that and use that module as well, but
> currently rotorcraft has it's own handlers for the baro events
> (on_baro_abs_event in main.c).
>
> Cheers, Felix
>
> On Fri, Feb 10, 2012 at 3:57 PM, antoine drouin <address@hidden> wrote:
>>
>> it looks like there's a module for onboard baros, but it was only
>> configured for umarim and navgo boards. I've attached the
>> configuration for lisa_l. Feel free to add that to the repository if
>> you're a friend of git
>>
>> have fun
>>
>> Poine
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]