Re: [Paparazzi-devel] AUTO1/2 Control Surface Deflection

[Felix Ruess]

Hi Chris,

do they work correctly in manual and auto1? If it's correct in manual, but not in auto1, then only the rc channels are switched, while the servo direction should have been reversed.

Cheers, Felix

On Tue, Feb 7, 2012 at 1:40 AM, Chris Wozny <address@hidden> wrote:

All,

I am currently using Lisa/M and noticed that my control surfaces are deflecting the opposite way they should be when I jerk the aircraft into situations where they should roll and pitch. There are so many gains in the airframe configuration and I'm not sure if this is dealt with in the horizontal control or vertical control loops (if at all.) Are these values separate from the PID gains in H_CTL and V_CTL? I've included a copy of my airframe configuration for posterities sake:

http://ece.arizona.edu/~cwozny/minivertigo_lisa_m.xml

Best,

Chris

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel