Re: [lwip-users] PBUFS + LWIP 1.3.0 + memory allocation

[Sirjee Rooplall]

Hi Martin,

Thanks, for that insight.

At this moement however, that does not affect me as I am using PPP through 
modem + LWIP.
Are there any grey areas here that I should be cautioned to?


Kind Regards, Sirjee Rooplall Figment Design laboratories (Pty) Ltd mailto: 
address@hidden Mobile: +27 (0)83 230 8466
----- Original Message ----- 
From: "Martin Persich" <address@hidden>
To: "Mailing list for lwIP users" <address@hidden>
Sent: Wednesday, February 10, 2010 1:14 PM
Subject: Re: [lwip-users] PBUFS + LWIP 1.3.0 + memory allocation


> Hi,
> I am using LwIP on AVR32 UC3 too. I am recommending you to upgrade to 
> 1.3.2. There are a lot of changes and corrected bugs.
> Official porting files for UC3 from Atmel don't existis in this moment, I 
> think. I made necessary changes in "sys_arch.c" myself, it is very easy. 
> I'd like refer you to serious problem that still exists in last version (V 
> 1.6.1) of Atmel's "Software framework" in file "ethernetif.c" - please see 
> http://lists.gnu.org/archive/html/lwip-users/2009-12/msg00043.html
> Martin
>
>
> ----- Original Message ----- 
> From: "Sirjee Rooplall" <address@hidden>
> To: "Mailing list for lwIP users" <address@hidden>
> Sent: Wednesday, February 10, 2010 10:44 AM
> Subject: Re: [lwip-users] PBUFS + LWIP 1.3.0 + memory allocation
>
>
> Hi, what were the problems, that warrant me to move to 1.3.2
>
> I am using the AVR32 UC3 port of LWIP 1.3.0 which was done by ATMEL.
>
> I just cannot move to 1.3.2 because I am not sure whats involved to 
> produce
> a new port for the AVR32 UC3 device.
>
> Kind Regards, Sirjee Rooplall Figment Design laboratories (Pty) Ltd 
> mailto:
> address@hidden Mobile: +27 (0)83 230 8466
> ----- Original Message ----- 
> From: "Bernhard 'Gustl' Bauer" <address@hidden>
> To: "Mailing list for lwIP users" <address@hidden>
> Sent: Wednesday, February 10, 2010 11:35 AM
> Subject: Re: [lwip-users] PBUFS + LWIP 1.3.0 + memory allocation
>
>
> > Sirjee Rooplall schrieb:
> > > I am using lwip 1.3.0. I am new to LWIP, ...
> >
> > Hi,
> >
> > there have been some problems with 1.3.0. Since you are new why don't you
> > start with 1.3.2?
> >
> > I know this doesn't answer your question, but maybe it spares you some
> > trouble :-)
> >
> > Gustl
> >
> >
> > _______________________________________________
> > lwip-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/lwip-users
>
>
>
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/lwip-users
>
>
>
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/lwip-users