[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Libunwind-devel] Power Libunwind
From: |
Jose Flavio Aguilar Paulino |
Subject: |
Re: [Libunwind-devel] Power Libunwind |
Date: |
Fri, 03 Aug 2007 02:01:08 -0300 |
The problem is that the new configure.sh is not available updated in
Git.
To make it build easily just
delete the files:
Makefile.in
src/Makefile.in
tests/Makefile.in
after that run autoconf and automake in libuniwnd root dir.
then you can run configure... the correct arch to detect would be
"ppc64"!
any doubts, just say, I would be glad to help,
Jose Flavio A. Paulino
IBM Ltc Brazil Toolchain Team
On Thu, 2007-08-02 at 17:56 -0700, address@hidden wrote:
> I'm facing problems with my build because the configure detects the
> platform as powerpc64 instead of ppc64 and looks for files named
> *powerpc64* instead of *ppc64*
>
> Is there a way to configure this?
>
> Also, does this patch apply to 32-bit Power3 AIX too?
>
> On 8/2/07, Jose Flavio Aguilar Paulino <address@hidden> wrote:
> > Hi David!
> >
> > Its very good to have power main stream!
> > Now I will do more complex tests and maybe incremental fixes!
> >
> > The only last problem is that you didnt run autoconf and automake, or
> > didnt have removed Makefile.in, /src/Makefile.in and /tests/Makefile.in
> >
> > If you could do that and commit this files, I would be glad!
> >
> > Thanks,
> > Flavio
> >
> > On Thu, 2007-08-02 at 10:01 -0600, David Mosberger-Tang wrote:
> > > Jose,
> > >
> > > This patch looks good to me. I merged it and pushed it into the git
> > > tree. I only did a build on x86 so no real testing on my end, but I
> > > figured you were eager to see it in GIT so we can start doing
> > > incremental fixes. ;-)
> > >
> > > Documentation updates are definitely welcome, too!
> > >
> > > Please let me know if you see any issues.
> > >
> > > Thanks!
> > >
> > > --david
> > >
> > > On 8/2/07, Jose Flavio Aguilar Paulino <address@hidden> wrote:
> > > Well, if the symbol has the the address of the function
> > > pointer, it is
> > > not a problem, I removed all get_function_address!
> > >
> > > Well, remember to do autoconf and automake.
> > > And if possible, in libunwind page write this build
> > > instructions:
> > > CC='gcc -m64 -maltivec' ../libunwind/configure && make -j2
> > >
> > > regards,
> > > Flávio
> > >
> > >
> > > On Thu, 2007-08-02 at 07:27 -0600, David Mosberger-Tang wrote:
> > > > On 8/2/07, Jose Flavio Aguilar Paulino <address@hidden>
> > > wrote:
> > > > because when the symbol is a function, and you are
> > > looking for
> > > > it, we
> > > > have the following:
> > > > val = sym->st_value;
> > > >
> > > > but, in Power (I don't know how it works in IA64),
> > > this value
> > > > would be
> > > > the address of entry in the table, not the address
> > > of the
> > > > symbol, so the
> > > > look up will fail.
> > > >
> > > > Why is that a problem? On ia64, we also return the address
> > > of the
> > > > function descriptor. That *is* the value of a function
> > > pointer, after
> > > > all. I guess I'm still not following.
> > > >
> > > >
> > > >
> > > > --david
> > > > --
> > > > Mosberger Consulting LLC,
> > > http://www.mosberger-consulting.com/
> > >
> > >
> > >
> > >
> > > --
> > > Mosberger Consulting LLC, http://www.mosberger-consulting.com/
> >
> >
> >
> > _______________________________________________
> > Libunwind-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/libunwind-devel
> >
>
>
- Re: [Libunwind-devel] Power Libunwind, Jose Flavio Aguilar Paulino, 2007/08/01
- Re: [Libunwind-devel] Power Libunwind, David Mosberger-Tang, 2007/08/01
- Message not available
- Message not available
- Re: [Libunwind-devel] Power Libunwind, Jose Flavio Aguilar Paulino, 2007/08/02
- Re: [Libunwind-devel] Power Libunwind, David Mosberger-Tang, 2007/08/02
- Re: [Libunwind-devel] Power Libunwind, Andreas Schwab, 2007/08/02
- Message not available
- Message not available
- Re: [Libunwind-devel] Power Libunwind, Jose Flavio Aguilar Paulino, 2007/08/02
- Re: [Libunwind-devel] Power Libunwind, prasun3, 2007/08/02
- Re: [Libunwind-devel] Power Libunwind,
Jose Flavio Aguilar Paulino <=
- Re: [Libunwind-devel] Power Libunwind, prasun3, 2007/08/03
- Re: [Libunwind-devel] Power Libunwind, Jose Flavio Aguilar Paulino, 2007/08/03