[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Initialising a u-blox device.
|
From: |
Gary E. Miller |
|
Subject: |
Re: Initialising a u-blox device. |
|
Date: |
Wed, 20 May 2020 08:55:53 -0700 |
Yo David!
On Wed, 20 May 2020 16:43:26 +0100
"David J Taylor" <address@hidden> wrote:
> From my tests, it seems that my u-blox MAX-M8Q-0-10 may need to be
> set into a particular mode on startup, by send the appropriate
> configuration command (there is no flash or battery-backed RAM).
No need to test to know that.
> The
> default mode isn't quite what I want. From searching the Web there
> seem to be a number of ways of doing this, some deprecated, so what
> would be the most appropriate way. The command would be to enable
> Galileo.
Easy: https://gpsd.io/ubxtool-examples.html#_constellations
> I'm using gpsd 3.17.
Oh. Good luck with that...
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpqkdlIClHJw.pgp
Description: OpenPGP digital signature