[Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B

[Samson Lee]

Apparently dvdrtools does not support the LG GSA-4167

http://lists.gnu.org/archive/html/dvdrtools-users/2005-10/msg00007.html

Is there any other way I can burn a pre-mastered ISO-image to DVD?

The closest solution I have so far is to use growisofs. First, I had to 
mount the dvd.iso into a folder and then use growisofs -Z /dev/dvd 
-dvd-video /mnt/mountediso ... mounting the iso before burning is not 
always suitable

growisofs -Z /dev/dvd=dvd.iso is supposed to burn the iso directly to 
the dvd .. but it doesn't work with my LG GSA-4167, so it is still not 
possible to burn an iso directly to disk ...

Please help me!

Thanks!

Here is the -v output from dvdrecord:

address@hidden:temp# dvdrecord -v -dao dev=/dev/dvd dvd.iso
dvdrtools v0.1.5
Portions (c) 2002-2003 Ark Linux <address@hidden>
dvdrtools patched by Julien Delange for Debian
Note that you have to reports bug to the debian maintainer
Please ask Debian for support, and not ask the original author
This program is free software; you can redistribute it and/or modify it 
under
the terms of the GNU General Public License as published by the Free 
Software
Foundation; either version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but 
WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or 
FITNESS FOR
A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with
this program; see the file COPYING.  If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/dvd'
devname: '/dev/dvd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4167B'
Revision       : 'DL10'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  3571 MB
Total size:     4102 MB (406:24.00) = 1828800 sectors
Lout start:     4102 MB (406:26/00) = 1828800 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
  ATIP start of lead out: 157789 (35:05/64)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 466304
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 1828966
Track 01:   0 of 3571 MB written.dvdrecord: Success. write_g1: scsi 
sendcmd: no
error
CDB:  2A 00 00 1B E8 66 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0E 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.004s timeout 200s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 10 00 00 00 0E 00 00 00 00 00 00
Writing  time:   16.436s
Fixating...
Fixating time:    0.005s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


--
UTS CRICOS Provider Code:  00099F
DISCLAIMER: This email message and any accompanying attachments may contain
confidential information.  If you are not the intended recipient, do not
read, use, disseminate, distribute or copy this message or attachments.  If
you have received this message in error, please notify the sender 
immediately and delete this message. Any views expressed in this message 
are those of the individual sender, except where the sender expressly, and 
with authority, states them to be the views the University of Technology, 
Sydney. Before opening any attachments, please check them for viruses and 
defects.