Re: [Tlf-devel] S&P/RUN mode confusion

[Pat Collins]

On Sun, 22 Dec 2013 21:02:39 -0500 Ed <address@hidden> wrote

> I want to clear up any confusion I've made. First of all we are talking
> S&P, and not RUN.
> 
> First item is if you are going to do S&P, you need to press (+) to
> change from LOG to S&P.
> 
> The following depends on the contest and the exchange. I'm going to use
> the CQWW as an example.
> 
> Type in the RUN station's call, the cursor will move to the exchange
> input field. <enter> will send your call. If you are not heard you will
> need to use F2, as the input field is populated with the RUN stations
> zone from the cty.dat file. When you are heard and the RUN station sends
> his info <enter> will send your info and log the qso, using the S&P TU
> message. You need to have a proper exchange string in the S&P TU message
> and no where else. If the RUN station needs a fill (_) will resend your
> info. If you need to log the QSO without CW output use the backslash (\).
> 

The prefill on the exchange has caused me trouble in the past in s&p mode,
especially since I'm qrp most all the time, but it works the same as N1MM. So,
be careful before that second press of enter.


Here are the N1MM docs for ref: 

http://n1mm.hamdocs.com/tiki-index.php?page=ESM+%28Enter+Sends+Messages%29


Pat