Re: [Paparazzi-devel] paparazzi with 2.4GHz

[evan igor]

so what is the wrong thing i did for setting and does the radio.xml has effect with transmitter.

and how could i get these parameters for my transmitter

On Thu, Mar 13, 2014 at 9:35 PM, Felix Ruess <address@hidden> wrote:

This comment was misleading, corrected it...

On Thu, Mar 13, 2014 at 2:51 PM, evan igor <address@hidden> wrote:

and what is this CAUTION! This is only used for PPM transmitters so it does not apply to DSM/DSM2/FASST/FHSS or other 2.4Ghz radios.  in http://wiki.paparazziuav.org/wiki/Radio_Control

mean as i can use the 2.4 Ghz

sorry for any interrupts and thanks for help in advance :)

On Thu, Mar 13, 2014 at 3:34 PM, evan igor <address@hidden> wrote:

Hi all;

i tried the binding sequence, one question i connected the bind cable to the receiver so i connect between GND and signal pin as well as connecting GND with ADC1 pin in ANALOGL1.  or i shouldn't connect the binding cable to the receiver and only connect  GND with ADC1 pin in ANALOGL1.

On Thu, Mar 13, 2014 at 3:02 PM, Felix Ruess <address@hidden> wrote:

http://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Using_a_Spectrum_DSM_receiver
http://wiki.paparazziuav.org/wiki/Subsystem/radio_control#Spektrum

On Thu, Mar 13, 2014 at 1:37 PM, evan igor <address@hidden> wrote:

Hi,

the problem i face that i have orange receiver this one

http://www.hobbyking.com/hobbyking/store/__28554__OrangeRx_R615_Spektrum_JR_DSM2_Compatible_6Ch_2_4Ghz_Receiver.html

and i have also transmitter spektrum dx5e

but i tried to connect them with paparazzi liza/m and no signal while i use this radio.xml   i attached

On Thu, Mar 13, 2014 at 2:07 PM, Chris <address@hidden> wrote:

of course as long as either you have a PPM signal available from the receiver like
some Frsky ones, Spectrum receivers also work afaik
This signal is often called combined PPM (cppm) and other names as it is essentially a wavetrain containing the pulse width of all servos.
All LRS type (long range system) receivers have a ppm output as nearly all autopilots need that signal.
Chris

On 03/13/2014 12:47 PM, evan igor wrote:

Hi,

does paparazzi wok with 2.4Ghz transmitter?

as this 

CAUTION! This is only used for PPM transmitters so it does not apply to DSM/DSM2/FASST/FHSS or other 2.4Ghz radios. 

in the http://wiki.paparazziuav.org/wiki/Radio_Control

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel