paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] paparazzi with 2.4GHz


From: evan igor
Subject: Re: [Paparazzi-devel] paparazzi with 2.4GHz
Date: Thu, 13 Mar 2014 14:37:49 +0200

Hi,

the problem i face that i have orange receiver this one
http://www.hobbyking.com/hobbyking/store/__28554__OrangeRx_R615_Spektrum_JR_DSM2_Compatible_6Ch_2_4Ghz_Receiver.html

and i have also transmitter spektrum dx5e
but i tried to connect them with paparazzi liza/m and no signal while i use this radio.xml   i attached


On Thu, Mar 13, 2014 at 2:07 PM, Chris <address@hidden> wrote:
of course as long as either you have a PPM signal available from the receiver like
some Frsky ones, Spectrum receivers also work afaik
This signal is often called combined PPM (cppm) and other names as it is essentially a wavetrain containing the pulse width of all servos.
All LRS type (long range system) receivers have a ppm output as nearly all autopilots need that signal.
Chris


On 03/13/2014 12:47 PM, evan igor wrote:
Hi,
does paparazzi wok with 2.4Ghz transmitter?


as this 

CAUTION! This is only used for PPM transmitters so it does not apply to DSM/DSM2/FASST/FHSS or other 2.4Ghz radios. 



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


Attachment: spektrum.xml
Description: Text Data


reply via email to

[Prev in Thread] Current Thread [Next in Thread]