|
From: | evan igor |
Subject: | Re: [Paparazzi-devel] paparazzi with 2.4GHz |
Date: | Thu, 13 Mar 2014 15:34:51 +0200 |
http://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Using_a_Spectrum_DSM_receiver
http://wiki.paparazziuav.org/wiki/Subsystem/radio_control#Spektrum
On Thu, Mar 13, 2014 at 1:37 PM, evan igor <address@hidden> wrote:
Hi,the problem i face that i have orange receiver this oneand i have also transmitter spektrum dx5ebut i tried to connect them with paparazzi liza/m and no signal while i use this radio.xml i attachedOn Thu, Mar 13, 2014 at 2:07 PM, Chris <address@hidden> wrote:of course as long as either you have a PPM signal available from the receiver like
some Frsky ones, Spectrum receivers also work afaik
This signal is often called combined PPM (cppm) and other names as it is essentially a wavetrain containing the pulse width of all servos.
All LRS type (long range system) receivers have a ppm output as nearly all autopilots need that signal.
Chris
On 03/13/2014 12:47 PM, evan igor wrote:
Hi,does paparazzi wok with 2.4Ghz transmitter?
as this
CAUTION! This is only used for PPM transmitters so it does not apply to DSM/DSM2/FASST/FHSS or other 2.4Ghz radios.
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |