paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Krooz sd does not work with the latest master


From: antoine drouin
Subject: Re: [Paparazzi-devel] Krooz sd does not work with the latest master
Date: Fri, 13 Dec 2013 17:01:14 +0100

I'm glad to see I'm not the only one in distress with the version control system


On Fri, Dec 13, 2013 at 11:37 AM, Chris <address@hidden> wrote:
Gautier
I am not sure how i can revert to older versions and if this is possible.
If it is i can load older versions and test them.

Chris


On 12/13/2013 12:11 PM, Gautier Hattenberger wrote:
Hi,
Can you be a bit more specific about the exact version (using ./paparazzi_version) that is working ? Can you test some other versions to have a better idea about when it stops working ?
Thanks

Gautier

Le 13/12/2013 10:17, Chris a écrit :
Hi.
I just noticed that the krooz sd autopilot remains "dead" after a fixed wing or a hexacopter ap program upload using the latest master.
The program uploads fine but then nothing runs and all leds are off.
When i remove the power and apply it again the green led only lights up for a second and then it goes off.
Now if i use an older (2-3 monhts old master release everything works fine again so it is not a hardware or compiler problem.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]