paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Krooz sd does not work with the latest master


From: Chris
Subject: Re: [Paparazzi-devel] Krooz sd does not work with the latest master
Date: Fri, 13 Dec 2013 12:30:35 +0200
User-agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.2.0

Hi Gautier and sorry for not being specific.

With this version (the latest master) i first noticed that it doesn't work:

address@hidden:~/paparazzi$ ./paparazzi_version
v5.1_devel-688-ga6b8867-dirty
address@hidden:~/paparazzi$

with this version (older master) everything works fine:

address@hidden:~/paparazzi$ ./paparazzi_version
v5.1_devel-321-g3651e8c-dirty
address@hidden:~/paparazzi$

Chris



On 12/13/2013 12:11 PM, Gautier Hattenberger wrote:
Hi,
Can you be a bit more specific about the exact version (using ./paparazzi_version) that is working ? Can you test some other versions to have a better idea about when it stops working ?
Thanks

Gautier

Le 13/12/2013 10:17, Chris a écrit :
Hi.
I just noticed that the krooz sd autopilot remains "dead" after a fixed wing or a hexacopter ap program upload using the latest master.
The program uploads fine but then nothing runs and all leds are off.
When i remove the power and apply it again the green led only lights up for a second and then it goes off. Now if i use an older (2-3 monhts old master release everything works fine again so it is not a hardware or compiler problem.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel





reply via email to

[Prev in Thread] Current Thread [Next in Thread]