[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?
From: |
gtoonstra |
Subject: |
Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY? |
Date: |
Sun, 27 Jan 2013 17:09:33 -0300 |
I bought 10 pckt of double crimped of 150 and 300mm types at element14 (3each
type). Digikey doesnt seem to sell them. I also bought several different
housings (2/3/4/5/6/7). For spi keep wire length less than 100mm by cutting out
a bit. By cutting in the middle and soldering to other things where required
you save up some.
Rgds,
Gerard
On 27/01/2013, at 14:38, Simon Liebold <address@hidden> wrote:
> All,
>
> I got my hardware already a while back but just now I am starting
> putting the parts together. I found it really complicated to crimp those
> tiny 1,25mm Molex crimps onto the wires. My crimper is supposedly for
> "Molex" crimps but probably only for the larger kinds.
>
> Survey: Did you buy the pre-crimped kind (pricey!) or did you manage to
> crimp them properly on your own? If the latter what tools did you use
> (crimper, magnifying glass, really calm hands,...)?
>
> Simon
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
- [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, Simon Liebold, 2013/01/27
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, Piotr Esden-Tempski, 2013/01/27
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?,
gtoonstra <=
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, Eduardo lavratti, 2013/01/27
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, gtoonstra, 2013/01/27
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, Martin Mueller, 2013/01/27
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, Simon Liebold, 2013/01/27
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, Andrius Batalauskas, 2013/01/28
- Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?, Simon Liebold, 2013/01/28