Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?

[Martin Mueller]

Mouser:
=======

crimps
538-50079-8000  female AWG 26-28 (Molex 50079-8000)


Farnell:
========

crimps
1653820         female AWG 26-28 (Molex 50079-8000)

cable
1125272     15cm, plug on both ends (Molex 06-66-0012)
1125276     30cm, plug on one end   (Molex 06-66-0015)

cable receptacle (Molex 51021-xx00)
889477    2pin
615092    3pin
9733116   4pin
615109    5pin
1012261   6pin
615110    7pin
1012262   8pin
615122    9pin
9733124   10pin
615160    14pin


RS-Components:
==============

cable
279-9516    15cm, plug on both ends (Molex 06-66-0012)
279-9544    30cm, plug on one end   (Molex 06-66-0015)

pcb connector, through hole, straight (Molex 53047-xx10)
279-9213    2pin
319-1064    3pin
279-9229    4pin
447-6596    5pin
279-9235    6pin
447-6603    7pin
279-9241    8pin
447-6619    9pin
279-9263    10pin
670-4244    14pin

pcb connector, through hole, 90 deg (Molex 53048-xx10)
279-9285    4pin
447-6625    5pin

pcb connector, smd, straight (=th 90deg) (Molex 53398-xx71)
656-3018    4pin

pcb connector, smd, 90 deg (=th str) (Molex 53261-xx71)
542-7141    7pin

cable receptacle (Molex 51021-xx00)
279-9156    2pin
319-1036    3pin
279-9162    4pin
447-6580    5pin
279-9178    6pin
342-1696    7pin
279-9184    8pin
342-1646    9pin
279-9207    10pin
670-4082    14pin

On 01/27/2013 09:30 PM, Eduardo lavratti wrote:
> Have you the part number ? and price ?
>
>
>
>  > From: address@hidden
>  > Date: Sun, 27 Jan 2013 17:09:33 -0300
>  > To: address@hidden
>  > Subject: Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?
>  >
>  > I bought 10 pckt of double crimped of 150 and 300mm types at
> element14 (3each type). Digikey doesnt seem to sell them. I also bought
> several different housings (2/3/4/5/6/7). For spi keep wire length less
> than 100mm by cutting out a bit. By cutting in the middle and soldering
> to other things where required you save up some.
>  >
>  > Rgds,
>  >
>  > Gerard
>  >
>  > On 27/01/2013, at 14:38, Simon Liebold <address@hidden> wrote:
>  >
>  > > All,
>  > >
>  > > I got my hardware already a while back but just now I am starting
>  > > putting the parts together. I found it really complicated to crimp
> those
>  > > tiny 1,25mm Molex crimps onto the wires. My crimper is supposedly for
>  > > "Molex" crimps but probably only for the larger kinds.
>  > >
>  > > Survey: Did you buy the pre-crimped kind (pricey!) or did you manage to
>  > > crimp them properly on your own? If the latter what tools did you use
>  > > (crimper, magnifying glass, really calm hands,...)?
>  > >
>  > > Simon
>  > >
>  > > _______________________________________________
>  > > Paparazzi-devel mailing list
>  > > address@hidden
>  > > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>  >
>  > _______________________________________________
>  > Paparazzi-devel mailing list
>  > address@hidden
>  > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel