Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?

[Eduardo lavratti]

Have you the part number ? and price ?

> From: address@hidden
> Date: Sun, 27 Jan 2013 17:09:33 -0300
> To: address@hidden
> Subject: Re: [Paparazzi-devel] Molex PicoBlade: pre-crimped wires or DIY?
>
> I bought 10 pckt of double crimped of 150 and 300mm types at element14 (3each type). Digikey doesnt seem to sell them. I also bought several different housings (2/3/4/5/6/7). For spi keep wire length less than 100mm by cutting out a bit. By cutting in the middle and soldering to other things where required you save up some.
>
> Rgds,
>
> Gerard
>
> On 27/01/2013, at 14:38, Simon Liebold <address@hidden> wrote:
>
> > All,
> >
> > I got my hardware already a while back but just now I am starting
> > putting the parts together. I found it really complicated to crimp those
> > tiny 1,25mm Molex crimps onto the wires. My crimper is supposedly for
> > "Molex" crimps but probably only for the larger kinds.
> >
> > Survey: Did you buy the pre-crimped kind (pricey!) or did you manage to
> > crimp them properly on your own? If the latter what tools did you use
> > (crimper, magnifying glass, really calm hands,...)?
> >
> > Simon
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel