Re: Mingw Octave 3.4.2 - blank gnuplot printouts

[Tatsuro MATSUOKA]

Hello

I have forgotten to write
Please add
libgomp-1.dll
libpthread-2.dll
to bin directory from bin directory of MinGW-TM.zip.
This is required for
libGraphicsMagick-3.dll

Otherwise imread will be in failure.

Regards

Tatsuro
--- On Tue, 2011/9/13, Tatsuro MATSUOKA wrote:

> Hello
> 
> Thank you for your carefully looking into my distribution.
> 
> --- On Tue, 2011/9/13, Nit Nit wrote:
> 
> > 
> > Hello Tatsuro,
> > 
> > 
> > For my last octave tree, I have used your octave-3.4.2.zip dated Aug 08, 
> > 2011
> > 
> > I need some clarifications regarding your updates
> > 
> > 1. On Aug 18, 2011, you have added libltdl-7.dll and libwmflite7.dll to the 
> > bin sub-directory of your octave-3.4.2.zip probably as a response to the 
> > first post in 
> > http://octave.1599824.n4.nabble.com/Missing-DLLs-was-Issues-amp-questions-building-Octave-3-4-2-MinGW-td3729635.html
> >  but I am not sure whether these are really required.
> > Regarding libwmflite-7.dll - it was required for building oct files by your 
> > octave-3.4.2.zip+OctaveLibs.zip versions prior to Aug 8, but at least for 
> > me, it was not required any more by Aug 8 versions of your 
> > octave-3.4.2.zip+OctaveLibs.zip (after copying libblas.dll.a, 
> > libfftw3.dll.a, libfftw3f.dll.a, liblapack.dll.a from recent OctaveLibs.zip 
> > to lib subdir of my octave tree).
> > Regarding libltdl-7.dll - it is bundled in the bin subdir of your 
> > MinGW-TM.zip which is consistent with Benjamin's 3.2.4 mingw installation 
> > tree.
> 
>  I have updated the Graphiscs Magick on August.  I have checked the 
> dependency by dependency walker, libwmflite-7.dll  is not linked with 
> GraphicsMagick dll files but libltdl-7.dll is linked with it.
> 
> > 2. In your recent version (Sep 12, 2011) you have added share/gnuplot 
> > subdir which has solved the gnuplot print problems but in addition there 
> > are many changes probably due to a new build. Can you confirm that the 
> > following are OK ? Do I have to re-compile/re-install all pkgs because of 
> > the new octave build ?
> 
> Newly build was happened accidentally. You can use the components in the 
> Octave3.4.2_gcc4.5.2.7z  just adding  share/gnuplot subdir .
> > changed/updated files in the bin and lib subdirs:
> > bin/libcruft-0.dll
> > bin/liboctave-0.dll
> > bin/liboctinterp-0.dll
> > bin/mkoctfile-3.4.2.exe
> > bin/mkoctfile.exe
> > bin/octave-3.4.2.exe
> > bin/octave-config-3.4.2.exe
> > bin/octave-config.exe
> > bin/octave.exe
> > lib/octave/3.4.2/oct/libcruft.dll.a
> > lib/octave/3.4.2/oct/liboctave.dll.a
> > lib/octave/3.4.2/oct/liboctinterp.dll.a
> The above files need not be required
>  
> > new files in the bin subdir:
> > pthreadGC2.dll
> This is linked from libGraphicsMagick-3.dll at updating Graphics Magick on 
> August. 
>  
> 
> > removed files in the bin subdir:
> > sed.exe
> > wgnuplot.GID
> wgnuplot.GID is the tempory files of gnuplot so that it is not required.
> 
> About the sed, I have misled  that it is required at execution of octave.
> However it seems not be required so I delete it. 
> (The msys sed is needed for 'pkg install')
> > In addition, sed related subdirs and files have been removed:
> > contrib/sed/*
> > manifest/sed-4.2.1-bin.mft
> > manifest/sed-4.2.1-bin.ver
> > share/locale/*/LC_MESSAGES/sed.mo
> > 
> 
>