Thanks. I'm back in business but do not really understand what's
going
on.
The second time around I was more careful and picked option (2)
below.
Instead of 31 packages, as during first unsuccessful installation
with
option (1), only 10 additional packages were installed.
Second installation run to completion in about 6 hrs but I was not
sure what
would happen with regard to graphics. When I run a script which does
some
matrix calculations and then uses:
% Trying a graph
gset term aqua (1)
It worked exactly as before and AquaTerm was called (I guess by
gnuplot) and
it graphed what I expected as before. I know that AquaTerm (but not
octave
nor gnuplot) was installed during unsuccessful first installation on
11/28/03.
So my question remains: Why should a later Fink package of octave
(i.e.
GNU Octave, version 2.1.46 (powerpc-apple-darwin6.8)
out of the blue need xfree86 when my earlier package 2.1.36 did not
require
it. At that time (one year ago), I had downloaded xfree86 but was
told
that
I did not need it.
Dec 02 2003 Reinstall
Information about 1324 packages read in 11 seconds.
fink needs help picking an alternative to satisfy a virtual
dependency. The
candidates:
(1) system-xfree86: Placeholder package for manually installed
XFree86
(2) xfree86-base: XFree86 libraries, utilities, clients and data
Pick one: [1]
The following package will be reinstalled:
octave
The following 10 additional packages will be installed:
fftw fftw-shlibs gnuplot hdf hdf5 hdf5-bin hdf5-shlibs texinfo
xfree86-base
xfree86-base-shlibs
Do you want to continue? [Y/n]
curl -f -L -O http://distfiles.opendarwin.org/X4211src.tar.bz2
....cut....
Henry
on 12/2/03 12:27 PM, Gavin Jin at address@hidden wrote:
According to Fink, system-xfree86-4.2-13 is just a place holder for
other X11 like Apple's.
So, if you installed system-xfree86, you have to have some other
distribution of X11.
Maybe you need to install or reinstall Apple's X11, along with the
X11
SDK, and the latest development tools
for 10.2 from Apple.
On Dec 1, 2003, at 7:49 PM, Henry F. Mollet wrote:
Thank you and apologies for incomplete info. I'm still using Mac
OSX
V.10.2.8 (not 10.3 Panther) and was under the impression that
Fink/FinkCommander would lead me to latest source code.
Whereas I noticed that an info and a patch file for 2.1.50-11 were
downloaded during the failed installation, it was only
octave-2.1.46.tar.gz
that was downloaded but then apparently not installed because of
alleged
problem with package system-xfree86-4.2-13. (I don't need xfree86
because my
previous version of Octave, 2.1.35, installed 1 yr ago using Fink,
worked
fine using Gnuplot in combination with AquaTerm).
I had a look at http://homepage.mac.com/chibaf/math/macosx/install/
which looks promising and I'll work on it as soon as the link to
Octave
loads in my browser. However, this URL appears to have conflicting
information. It first mentions what's needed (OS 10.2 or later,
Developer,
AND FINK). Then it says to install g77, which I suspect is not
needed
if
FINK was installed?) and then it gives
% .configure
% make
% sudo make install
instructions for some of the programs (e.g. Gnuplot and Octave with
Atlas
and fftw) implying that we are not using Fink.
Similar to the current thread on installation of Octave on PC, the
instructions apparently are never quite clear for many on Mac or PC
to
get
Octave running, so one could use this great program without major
difficulties to begin with.
Henry
on 12/1/03 4:51 PM, Gavin Jin at address@hidden wrote:
The Fink developers were still porting applications to 10.3 last
time
I
checked, and
they still recommended binary installation until they stabilize
the
packages.
That supported binary is older than 2.1.46.
So I updated mine with Darwinport
[gavin-unix:myWork/ruby/libpcap-ruby] gjin% octave --version
GNU Octave, version 2.1.50 (powerpc-apple-darwin7.0.0).
Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 John
W.
Eaton.
This is free software; see the source code for copying conditions.
There is ABSOLUTELY NO WARRANTY; not even for MERCHANTIBILITY or
FITNESS FOR A PARTICULAR PURPOSE.
Report bugs to <address@hidden>.
[gavin-unix:myWork/ruby/libpcap-ruby] gjin% port search octave
octave math/octave 2.1.50 a Matlab-like
environment for numerical analysis
[gavin-unix:myWork/ruby/libpcap-ruby] gjin%
I also downloaded the latest source code and followed the
instructions
on http://homepage.mac.com/chibaf/math/macosx/install/
without any problem.
On Dec 1, 2003, at 2:18 PM, Henry F. Mollet wrote:
I know this is a Fink or FinkCommander problem but I'm hoping a
Mac
user on
this list will be able to help.
I've tried to upgrade Octave to the latest available version on
Fink
and
failed and deleted previous version of Octave by mistake.
I've tried to install octave 2.1.46-1 using FinkCommander and
after 6.5 hours of compilation, the installation failed:
### execution of dpkg failed, exit code 1
Failed: can't install package system-xfree86-4.2-13
I did not anticipate xfree86 was needed and I may have made a
mistake
with
regard to any options presented for this during installation.
A little checking showed that
SW/Applications/AquaTerm (application) was present/installed and
could
be
opened. The tar.gz files for both octave and gnuplot were present
in
SW/SRC
but neither application was installed.
Before trying re-installation, I'm hoping for tip. Thanks
Henry
-------------------------------------------------------------
Octave is freely available under the terms of the GNU GPL.
Octave's home on the web: http://www.octave.org
How to fund new projects: http://www.octave.org/funding.html
Subscription information: http://www.octave.org/archive.html
-------------------------------------------------------------
Gavin Jin
150 Castilian Dr, Santa Barbarba
CA 93110
805-961-3693
Gavin Jin
150 Castilian Dr, Santa Barbarba
CA 93110
805-961-3693
-------------------------------------------------------------
Octave is freely available under the terms of the GNU GPL.
Octave's home on the web: http://www.octave.org
How to fund new projects: http://www.octave.org/funding.html
Subscription information: http://www.octave.org/archive.html
-------------------------------------------------------------