[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] gpsfake question
|
From: |
Gary E. Miller |
|
Subject: |
Re: [gpsd-users] gpsfake question |
|
Date: |
Wed, 10 May 2017 18:16:22 -0700 |
Yo Joshua!
On Wed, 10 May 2017 21:07:47 -0400
"Joshua Quesenberry" <address@hidden> wrote:
> I'm using gpsfake like this: gpsfake -l -c 0.05 test.nmea
Good. I did notice that you have no time in your test data. gpsd
wants to output full PVT solutions, and you are missing the T.
You need somethhing like a GPZDA to set the proper century, and maybe a
GPRMC, RMC stands for "Recommended minimum specific GPS/Transit data",
so considuer it a good minimum.
> For observing the data I was hoping to see updates using cgps.
You realize taht gpsfake does not open any port, like what cgps
uses. See the gpskafe man page.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can’t measure it, you can’t improve it." - Lord Kelvin
pgpjJWdsItlYG.pgp
Description: OpenPGP digital signature