emacs-orgmode
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [O] Org-mode and koma-script


From: Tim Cross
Subject: Re: [O] Org-mode and koma-script
Date: Wed, 29 Aug 2018 02:04:43 +1000
User-agent: mu4e 0.9.18; emacs 26.1

Sorry, I was in a rush before work and sent you the wrong command!

What you need to do is run emacs --debug-init rather than emacs -q.

Your emacs init is either in the file .emacs in your home directory or
the file init.el in the .emacs.d directory (assuming your not using
something like spacemacs or some other 'canned' setup, which may break
out the config into other files).

The code you posted i.e.

>>> ;;;;;;;;;;;;; CONFIGURATION POUR UTILISER LATEX ;;;;;;;;;;;;;;
>>> ;; Source : https://orgmode.org/worg/org-tutorials/org-latex-export.html
>>>
>>> ;; Pour pouvoir utiliser LaTeX dans un doc. org-mode
>>> (require 'ox-latex)
>>> (unless (boundp 'org-latex-classes)
>>>    (setq org-latex-classes nil))
>>> +
>>> (add-to-list 'org-latex-classes
>>>    '("article"
>>>    "\\documentclass{article}"
>>>    ("\\section{%s}" . "\\section*{%s}")))
>>>
>>> ;; Pour configurer les subdivisions des articles
>>> (add-to-list 'org-latex-classes
>>>    '("article"
>>>    "\\documentclass{article}"
>>>    ("\\section{%s}" . "\\section*{%s}")
>>>    ("\\subsection{%s}" . "\\subsection*{%s}")
>>>    ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
>>>    ("\\paragraph{%s}" . "\\paragraph*{%s}")
>>>    ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
>>>
>>> ;; Pour configurer les subdivisions de la classe book (indiquer :
>>> #+LaTeX_CLASS: book)
>>> (with-eval-after-load "ox-latex"
>>> (add-to-list 'org-latex-classes
>>>    '("book"
>>>    "\\documentclass{book}"
>>>    ("\\part{%s}" . "\\part*{%s}")
>>>    ("\\chapter{%s}" . "\\chapter*{%s}")
>>>    ("\\section{%s}" . "\\section*{%s}")
>>>    ("\\subsection{%s}" . "\\subsection*{%s}")
>>>    ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))))
>>>
>>> ;; Pour utiliser la classe koma-script. Indiquer : #+LaTeX_CLASS:
>>> koma-article
>>> (with-eval-after-load "ox-latex"
>>>    (add-to-list 'org-latex-classes
>>>    '("koma-article" "\\documentclass{scrartcl}"
>>>    ("\\section{%s}" . "\\section*{%s}")
>>>    ("\\subsection{%s}" . "\\subsection*{%s}")
>>>    ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
>>>    ("\\paragraph{%s}" . "\\paragraph*{%s}")
>>>    ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))))
>>

doesn't look quite right. It should be in your init file i.e. .emacs or
.emacs.d/init.el and it needs to be correctly formed elisp statements,
The --debug-init will check this. Looking at it, you seem to have a
spurious '+' character, but there may be other problems as well.

There is a customize interface you can use to add the korma classes,
which may be easier than writing elisp if your not familiar with
that. Do M-x customize-group <ret> org and have a look around. 

What I use in my init is

  (setq org-latex-classes
        '(("beamer"
           "\\documentclass[presentation]{beamer}"
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
          ("hitec-article"
           "\\documentclass[12pt]{hitec}
  [DEFAULT-PACKAGES]
  [PACKAGES]
  [NO-EXTRA]
  \\settextfraction{0.95}\n"
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
           ("\\paragraph{%s}" . "\\paragraph*{%s}")
           ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
          ("article" "\\documentclass[11pt]{article}"
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
           ("\\paragraph{%s}" . "\\paragraph*{%s}")
           ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
          ("korma-article" "\\documentclass[11pt]{scrartcl}"
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
           ("\\paragraph{%s}" . "\\paragraph*{%s}")
           ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
          ("report"
           "\\documentclass[11pt]{report}"
           ("\\part{%s}" . "\\part*{%s}")
           ("\\chapter{%s}" . "\\chapter*{%s}")
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
          ("korma-report"
           "\\documentclass[11pt]{scrreport}"
           ("\\part{%s}" . "\\part*{%s}")
           ("\\chapter{%s}" . "\\chapter*{%s}")
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
          ("korma-book"
           "\\documentclass[11pt]{scrbook}"
           ("\\part{%s}" . "\\part*{%s}")
           ("\\chapter{%s}" . "\\chapter*{%s}")
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
          ("book"
           "\\documentclass[11pt]{book}"
           ("\\part{%s}" . "\\part*{%s}")
           ("\\chapter{%s}" . "\\chapter*{%s}")
           ("\\section{%s}" . "\\section*{%s}")
           ("\\subsection{%s}" . "\\subsection*{%s}")
           ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))))

gmx <address@hidden> writes:

> Thanks a lot for your answer, Tim. I entered the emacs -q command, which 
> started emacs. The only message from the Terminal (before launching 
> emacs) is this:
>
> (emacs:3687): GConf-WARNING **: Client failed to connect to the D-BUS 
> daemon:
> Did not receive a reply. Possible causes include: the remote application 
> did not send a reply, the message bus security policy blocked the reply, 
> the reply timeout expired, or the network connection was broken.
>
> But no real problem.
>
> I did't find the init file : where is it, please ?
>
> Frédéric
>
>
> Le 28/08/2018 à 00:00, Tim Cross a écrit:
>> If that is a copy of what is in your .emacs or init.el file, then I
>> think you have a number of errors. Try running emacs -q and see if emacs
>> reports errors in  your init file.
>>
>> Tim
>>
>> gmx <address@hidden> writes:
>>
>>> I forgot the
>>>
>>> Le 27/08/2018 à 21:51, gmx a écrit:
>>>> Hello,
>>>>
>>>> I'm trying to use the koma class. I found a configuration of the.emacs
>>>> file, in the manual and in a Stack Exchange post
>>>> (https://tex.stackexchange.com/questions/364914/using-koma-script-article-with-org-mode).
>>>>
>>>>
>>>> I open a new .org file, and I declare:
>>>> #+TITLE: MyTitle
>>>> #+DATE: date
>>>> #+LANGUAGE: fr
>>>> #+LaTeX_CLASS: koma-article
>>>>
>>>> When I want to export my work in .pdf, I get the following answer:
>>>> Unknown LaTeX class 'koma-article'.
>>>>
>>>> What to do?
>>>> Thank you for your advice
>>>>
>>>> Frédéric (real newbie with org-mode, but I do my best)
>>>>
>>> contents of the file. Ready ?
>>>
>>>
>>>
>>> ;; Added by Package.el. This must come before configurations of
>>> ;; installed packages. Don't delete this line. If you don't want it,
>>> ;; just comment it out by adding a semicolon to the start of the line.
>>> ;; You may delete these explanatory comments.
>>> (package-initialize)
>>>
>>> (custom-set-variables
>>>   ;; custom-set-variables was added by Custom.
>>>   ;; If you edit it by hand, you could mess it up, so be careful.
>>>   ;; Your init file should contain only one such instance.
>>>   ;; If there is more than one, they won't work right.
>>>   '(ansi-color-faces-vector
>>>    [default default default italic underline success warning error])
>>>   '(ansi-color-names-vector
>>>    ["#212526" "#ff4b4b" "#b4fa70" "#fce94f" "#729fcf" "#e090d7"
>>> "#8cc4ff" "#eeeeec"])
>>>   '(current-language-environment "UTF-8")
>>>   '(custom-enabled-themes (quote (deeper-blue)))
>>>   '(display-battery-mode t))
>>> (custom-set-faces
>>>   ;; custom-set-faces was added by Custom.
>>>   ;; If you edit it by hand, you could mess it up, so be careful.
>>>   ;; Your init file should contain only one such instance.
>>>   ;; If there is more than one, they won't work right.
>>>   )
>>> (put 'upcase-region 'disabled nil)
>>>
>>>
>>> ;;;;;;;;;;;;; CONFIGURATION POUR UTILISER LATEX ;;;;;;;;;;;;;;
>>> ;; Source : https://orgmode.org/worg/org-tutorials/org-latex-export.html
>>>
>>> ;; Pour pouvoir utiliser LaTeX dans un doc. org-mode
>>> (require 'ox-latex)
>>> (unless (boundp 'org-latex-classes)
>>>    (setq org-latex-classes nil))
>>> +
>>> (add-to-list 'org-latex-classes
>>>    '("article"
>>>    "\\documentclass{article}"
>>>    ("\\section{%s}" . "\\section*{%s}")))
>>>
>>> ;; Pour configurer les subdivisions des articles
>>> (add-to-list 'org-latex-classes
>>>    '("article"
>>>    "\\documentclass{article}"
>>>    ("\\section{%s}" . "\\section*{%s}")
>>>    ("\\subsection{%s}" . "\\subsection*{%s}")
>>>    ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
>>>    ("\\paragraph{%s}" . "\\paragraph*{%s}")
>>>    ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
>>>
>>> ;; Pour configurer les subdivisions de la classe book (indiquer :
>>> #+LaTeX_CLASS: book)
>>> (with-eval-after-load "ox-latex"
>>> (add-to-list 'org-latex-classes
>>>    '("book"
>>>    "\\documentclass{book}"
>>>    ("\\part{%s}" . "\\part*{%s}")
>>>    ("\\chapter{%s}" . "\\chapter*{%s}")
>>>    ("\\section{%s}" . "\\section*{%s}")
>>>    ("\\subsection{%s}" . "\\subsection*{%s}")
>>>    ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))))
>>>
>>> ;; Pour utiliser la classe koma-script. Indiquer : #+LaTeX_CLASS:
>>> koma-article
>>> (with-eval-after-load "ox-latex"
>>>    (add-to-list 'org-latex-classes
>>>    '("koma-article" "\\documentclass{scrartcl}"
>>>    ("\\section{%s}" . "\\section*{%s}")
>>>    ("\\subsection{%s}" . "\\subsection*{%s}")
>>>    ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
>>>    ("\\paragraph{%s}" . "\\paragraph*{%s}")
>>>    ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))))
>>


-- 
Tim Cross



reply via email to

[Prev in Thread] Current Thread [Next in Thread]