[avrdude-dev] [bug #41561] AVRDUDE 6.0.1/USBasp doesn't write first bytes of flash page

[Karsten]

Follow-up Comment #26, bug #41561 (project avrdude):

Maybe the bug is back again, because i have the same problem now with avrdude:
Version 6.1

_____________________________________________________________________________

/usr/local/bin/avrdude -p m128 -P usb -c usbasp -U flash:w:main.hex:i
...
avrdude: 11440 bytes of flash written
avrdude: verifying flash memory against main.hex:
avrdude: load data flash data from input file main.hex:
avrdude: input file main.hex contains 11440 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 3.70s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0100
         0xff != 0x0d
avrdude: verification error; content mismatch

avrdude: safemode: Fuses OK (E:FF, H:90, L:8F)

avrdude done.  Thank you.
_____________________________________________________________________________

I will attach a complete log with -vvvv and the avrdude.conf

(file #35465)
    _______________________________________________________

Additional Item Attachment:

File name: avrdude.log.zip                Size:54 KB


    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?41561>

_______________________________________________
  Nachricht gesendet von/durch Savannah
  http://savannah.nongnu.org/