[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-libc-dev] [bugs #10329] crtm168.o is not being built

From: Theodore A. Roth
Subject: Re: [avr-libc-dev] [bugs #10329] crtm168.o is not being built
Date: Thu, 7 Oct 2004 10:00:06 -0700 (PDT)

On Thu, 7 Oct 2004, Keith Gudger wrote:

> Ted & Eric:
> I followed this thread because of a problem I found with avr-libc-1.0.4.
> Hopefully you can tell me I'm all wet, but here's what happened:
> I got the avr-libc-1.0.4 tar, and built it.  Afterwords, the avr3, avr4,
> and avr5 directories were no longer in my /usr/avr/lib directory, meaning
> all of those devices were no longer supported.  My version of avr-gcc is:
> avr-gcc (GCC) 3.3 20030428 (prerelease), which with binutils 2.13 should
> be OK, no?  Thanks.
> I checked config.log, and nothing unusual is in it.

I've seen this happen before.

How are you running configure? I vaguely recall having problems if you
try to run it from the same directory as configure.in.

Ted Roth
PGP Key ID: 0x18F846E9
Jabber ID: address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]