RE: [Dvdrtools-users] Re: Sony DRU-500A fails with DVD-RW (and with DVD-R too)

[Scott Prive]

I believe you can do a "simulated write" (anyone know the option, or am I 
mistaken?). If this still demonstrates the errors, you might save a few 
write-once discs..



> -----Original Message-----
> From: Jussi-Pekka Sairanen [mailto:address@hidden
> Sent: Friday, October 25, 2002 1:23 AM
> To: Bryan J. Smith; address@hidden
> Subject: [Dvdrtools-users] Re: Sony DRU-500A fails with 
> DVD-RW (and with
> DVD-R too)
> 
> 
> I don't know yet about DVD-R. I purchased three boxes  of 
> disks, DVD+RW, 
> DVD-RW and DVD+R.  DVD+RW has been the only success story so 
> far.  DVD+R 
> failed with messages below. For DVD+RW I used dvd+rw-tools.
> 
> 
> br,
> Jussi-Pekka
> 
> 
> linux /home/jps# dvdrecord -dao speed=2 dev=0,0,0 /video/jp/canon.iso
> dvdrtools - based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 
> Jörg Schilling
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'SONY    '
> Identifikation : 'DVD RW DRU-500A '
> Revision       : '1.0c'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags   : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Starting to write CD/DVD at speed 2 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. 
> Operation starts.
> trackno=0
> dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 02 55 46 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid) error refers to command part, 
> bit ptr 0 
> (not valid) field ptr 0
> cmd finished after 0.005s timeout 200s
> write track data: error after 0 bytes
> Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
> 
> Jussi-Pekka
> 
> 
> Bryan J. Smith wrote:
> 
> >On Thu, 2002-10-24 at 16:25, address@hidden wrote:
> >  
> >
> >>My main problem, however, is still the fact that the Sony
> >>DRU-500A fails writing on DVD-RW with error message
> >>Sense Key: 0x5 Illegal Request, Segment 0
> >>Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> >>Sense flags: Blk 0 (not valid)
> >>If this is not fixable I'll probably return the drive. I
> >>consider DVD-R/RW more important to me than DVD+R/RW
> >>(which, on the other hand, seems to work ok).
> >>    
> >>
> >
> >Does DVD-R(G) recording work with dvdrtools or cdrecord-ProDVD?
> >
> >I assume not "out-of-the-box" yet, because the drive is so 
> new, but you
> >never know.
> >
> >  
> >
> 
> 
> 
> 
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
> 
>