[Dvdrtools-users] Re: Sony DRU-500A fails with DVD-RW

[Jussi-Pekka Sairanen]

hi,

ok, I tried with cdrecord-ProDVD and it worked. It had something to say 
though about wrong startsec.



linux jps/bin# ./cdrecord-wrapper.sh -dao speed=2 dev=0,0,0 
/video/jp/mp3.iso
Cdrecord-ProDVD-Clone 1.11b19 (i586-pc-linux-gnu) Copyright (C) 
1995-2002 Jörg S
chilling
Unlocked features: ProDVD Clone
Limited  features: speed
This copy of cdrecord is licensed for: 
private/research/educational_non-commerci
al_use
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-500A '
Revision       : '1.0c'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
./cdrecord-ProDVD: WARNING: Drive returns wrong startsec (0) using -150
Track 01: Total bytes read/written: 875528192/875528192 (427504 sectors).



Bryan J. Smith wrote:

> On Thu, 2002-10-24 at 16:25, address@hidden wrote:
>  
>
> > My main problem, however, is still the fact that the Sony
> > DRU-500A fails writing on DVD-RW with error message
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > If this is not fixable I'll probably return the drive. I
> > consider DVD-R/RW more important to me than DVD+R/RW
> > (which, on the other hand, seems to work ok).
> >    
>
> Does DVD-R(G) recording work with dvdrtools or cdrecord-ProDVD?
>
> I assume not "out-of-the-box" yet, because the drive is so new, but you
> never know.
>
>