[Dvdrtools-users] Re: Sony DRU-500A fails with DVD-RW (and with DVD-R too)

[Jussi-Pekka Sairanen]

I don't know yet about DVD-R. I purchased three boxes  of disks, DVD+RW, 
DVD-RW and DVD+R.  DVD+RW has been the only success story so far.  DVD+R 
failed with messages below. For DVD+RW I used dvd+rw-tools.


br,
Jussi-Pekka


linux /home/jps# dvdrecord -dao speed=2 dev=0,0,0 /video/jp/canon.iso
dvdrtools - based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-500A '
Revision       : '1.0c'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
trackno=0
dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 02 55 46 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 
(not valid) field ptr 0
cmd finished after 0.005s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00

Jussi-Pekka


Bryan J. Smith wrote:

> On Thu, 2002-10-24 at 16:25, address@hidden wrote:
>  
>
> > My main problem, however, is still the fact that the Sony
> > DRU-500A fails writing on DVD-RW with error message
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > If this is not fixable I'll probably return the drive. I
> > consider DVD-R/RW more important to me than DVD+R/RW
> > (which, on the other hand, seems to work ok).
> >    
>
> Does DVD-R(G) recording work with dvdrtools or cdrecord-ProDVD?
>
> I assume not "out-of-the-box" yet, because the drive is so new, but you
> never know.
>
>