therion-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Therion] Re: Scaling issues with .3d files


From: Stacho Mudrak
Subject: [Therion] Re: Scaling issues with .3d files
Date: Wed, 15 Mar 2006 13:48:09 +0100
User-agent: Internet Messaging Program (IMP) 3.2.5 / FreeBSD-4.10

As Olly mentioned before, the problem is not in the data - but how therion is
compiled under 64bit.

When therion uses routines from img.c to read .3d file, it reads them not
correctly => number are so large. This problem has nothing to do with data or
survex.

Survex reports large ranges, because it recevies wrong information from therion.

S.


Quoting Philip Balister <address@hidden>:

> Hmm, you are correct. I need to check whcih svx file Philip is working
> with. The range in meters is confusing me. Guess I need to look closely
> at what is going on.
>
> Philip
>
> Wolfgang Zillig wrote:
> > I don't think that this is UTM. UMT has usually 7digits in y-direction
> > and 6 in x-direction.
> >
> > Wolfgang
> >
> > Philip Balister schrieb:
> >
> >>Olly,
> >>
> >>Just for your info the 3d file Philip Schuchardt is working with has
> >>the coordinate system for the cave set up so the station coordinates
> >>are also the UTM coordinates. This makes overlays easy with
> >>geo-referenced surface maps. This would explain why the x,y numbers
> >>are large.
> >>
> >>Philip
> >>
> >>Olly Betts wrote:
> >>
> >>>On Tue, Mar 14, 2006 at 08:19:36PM -0500, Philip Schuchardt wrote:
> >>>
> >>>
> >>>>10> Vertical range = 42949672.68m (from 20 at 42949672.68m to 21 at
> >>>>0.00m)
> >>>>11> North-South range = 42949672.86m (from 495 at 42949672.86m to 21
> >>>>at 0.00m)
> >>>>12> East-West range = 42949672.91m (from 15 at 42949672.91m to 21 at
> >>>>0.00m)
> >>>
> >>>
> >>>This looks like some weird coordinate wrap-around, since 42949672.91m is
> >>>0xfffffffb cm, which is -5cm if interpreted as a signed value.
> >>>
> >>>I think the problem must be in the data being fed into Survex, since
> >>>Survex itself doesn't store coordinates in integer cm until after this
> >>>point (they're used to store coordinates in the .3d file).
> >>>
> >>>Cheers,
> >>>    Olly
> >>>_______________________________________________
> >>>Therion mailing list
> >>>address@hidden
> >>>http://www.speleo.cz/mailman/listinfo/therion
> >>
> >>------------------------------------------------------------------------
> >>
> >>_______________________________________________
> >>Therion mailing list
> >>address@hidden
> >>http://www.speleo.cz/mailman/listinfo/therion
> >>
> >
> >
> > _______________________________________________
> > Therion mailing list
> > address@hidden
> > http://www.speleo.cz/mailman/listinfo/therion
>



_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.cz/mailman/listinfo/therion




reply via email to

[Prev in Thread] Current Thread [Next in Thread]