qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 3/8] hw/arm/realview: Explicit number of GIC external IRQs


From: Philippe Mathieu-Daudé
Subject: [PATCH 3/8] hw/arm/realview: Explicit number of GIC external IRQs
Date: Thu, 30 Jan 2025 19:24:36 +0100

When not specified, Cortex-A9MP configures its GIC with 64 external
IRQs (see commit a32134aad89 "arm:make the number of GIC interrupts
configurable"). Add the GIC_EXT_IRQS definition (with a comment)
to make that explicit.

Except explicitly setting a property value to its same implicit
value, there is no logical change intended.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/arm/realview.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index 9900a98f3b8..4a62c83506b 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -35,6 +35,14 @@
 #define SMP_BOOT_ADDR 0xe0000000
 #define SMP_BOOTREG_ADDR 0x10000030
 
+/*
+ * The Cortex-A9MP may have anything from 0 to 224 external interrupt
+ * IRQ lines (with another 32 internal). We default to 64+32, which
+ * is the number provided by the Cortex-A9MP test chip in the
+ * Realview PBX-A9 and Versatile Express A9 development boards.
+ */
+#define GIC_EXT_IRQS 64
+
 /* Board init.  */
 
 static struct arm_boot_info realview_binfo = {
@@ -185,7 +193,12 @@ static void realview_init(MachineState *machine,
     sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000);
 
     if (is_mpcore) {
-        dev = qdev_new(is_pb ? TYPE_A9MPCORE_PRIV : "realview_mpcore");
+        if (is_pb) {
+            dev = qdev_new(TYPE_A9MPCORE_PRIV);
+            qdev_prop_set_uint32(dev, "num-irq", GIC_EXT_IRQS + GIC_INTERNAL);
+        } else {
+            dev = qdev_new("realview_mpcore");
+        }
         qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
         busdev = SYS_BUS_DEVICE(dev);
         sysbus_realize_and_unref(busdev, &error_fatal);
@@ -201,7 +214,7 @@ static void realview_init(MachineState *machine,
         /* For now just create the nIRQ GIC, and ignore the others.  */
         dev = sysbus_create_simple(TYPE_REALVIEW_GIC, gic_addr, cpu_irq[0]);
     }
-    for (n = 0; n < 64; n++) {
+    for (n = 0; n < GIC_EXT_IRQS; n++) {
         pic[n] = qdev_get_gpio_in(dev, n);
     }
 
-- 
2.47.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]