qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[RFC PATCH v7 19/23] hw/intc/arm_gicv3: Implement NMI interrupt prioirty


From: Jinjie Ruan
Subject: [RFC PATCH v7 19/23] hw/intc/arm_gicv3: Implement NMI interrupt prioirty
Date: Wed, 6 Mar 2024 03:57:17 +0000

If GICD_CTLR_DS bit is zero and the NMI is non-secure, the NMI prioirty
is higher than 0x80, otherwise it is higher than 0x0. And save NMI
super prioirty information in hppi.superprio to deliver NMI exception.
Since both GICR and GICD can deliver NMI, it is both necessary to check
whether the pending irq is NMI in gicv3_redist_update_noirqset and
gicv3_update_noirqset. And In irqbetter(), only a non-NMI with the same
priority and a smaller interrupt number can be preempted but not NMI.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
---
v7:
- Reorder the irqbetter() code for clarity.
- Eliminate the has_superprio local variable for gicv3_get_priority().
- false -> cs->hpplpi.superprio in gicv3_redist_update_noirqset().
- 0x0 -> false in arm_gicv3_common_reset_hold().
- Clear superprio in several places for hppi, hpplpi and hppvlpi.
v6:
- Put the "extract superprio info" logic into gicv3_get_priority().
- Update the comment in irqbetter().
- Reset the cs->hppi.superprio to 0x0.
- Set hppi.superprio to false for LPI.
v4:
- Replace is_nmi with has_superprio to not a mix NMI and superpriority.
- Update the comment in irqbetter().
- Extract gicv3_get_priority() to avoid code repeat.
---
v3:
- Add missing brace
---
 hw/intc/arm_gicv3.c        | 69 +++++++++++++++++++++++++++++++++-----
 hw/intc/arm_gicv3_common.c |  3 ++
 hw/intc/arm_gicv3_redist.c |  3 ++
 3 files changed, 66 insertions(+), 9 deletions(-)

diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index 0b8f79a122..9496a28005 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -21,7 +21,8 @@
 #include "hw/intc/arm_gicv3.h"
 #include "gicv3_internal.h"
 
-static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio)
+static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio,
+                      bool has_superprio)
 {
     /* Return true if this IRQ at this priority should take
      * precedence over the current recorded highest priority
@@ -30,14 +31,23 @@ static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t 
prio)
      * is the same as this one (a property which the calling code
      * relies on).
      */
-    if (prio < cs->hppi.prio) {
-        return true;
+    if (prio != cs->hppi.prio) {
+        return prio < cs->hppi.prio;
+    }
+
+    /*
+     * The same priority IRQ with superpriority should signal to the CPU
+     * as it have the priority higher than the labelled 0x80 or 0x00.
+     */
+    if (has_superprio != cs->hppi.superprio) {
+        return has_superprio;
     }
+
     /* If multiple pending interrupts have the same priority then it is an
      * IMPDEF choice which of them to signal to the CPU. We choose to
      * signal the one with the lowest interrupt number.
      */
-    if (prio == cs->hppi.prio && irq <= cs->hppi.irq) {
+    if (irq <= cs->hppi.irq) {
         return true;
     }
     return false;
@@ -129,6 +139,40 @@ static uint32_t gicr_int_pending(GICv3CPUState *cs)
     return pend;
 }
 
+static bool gicv3_get_priority(GICv3CPUState *cs, bool is_redist,
+                               uint8_t *prio, int irq)
+{
+    uint32_t superprio = 0x0;
+
+    if (is_redist) {
+        superprio = extract32(cs->gicr_isuperprio, irq, 1);
+    } else {
+        superprio = *gic_bmp_ptr32(cs->gic->superprio, irq);
+        superprio = superprio & (1 << (irq & 0x1f));
+    }
+
+    if (superprio) {
+        /* DS = 0 & Non-secure NMI */
+        if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) &&
+            ((is_redist && extract32(cs->gicr_igroupr0, irq, 1)) ||
+             (!is_redist && gicv3_gicd_group_test(cs->gic, irq)))) {
+            *prio = 0x80;
+        } else {
+            *prio = 0x0;
+        }
+
+        return true;
+    }
+
+    if (is_redist) {
+        *prio = cs->gicr_ipriorityr[irq];
+    } else {
+        *prio = cs->gic->gicd_ipriority[irq];
+    }
+
+    return false;
+}
+
 /* Update the interrupt status after state in a redistributor
  * or CPU interface has changed, but don't tell the CPU i/f.
  */
@@ -141,6 +185,7 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs)
     uint8_t prio;
     int i;
     uint32_t pend;
+    bool has_superprio = false;
 
     /* Find out which redistributor interrupts are eligible to be
      * signaled to the CPU interface.
@@ -152,10 +197,11 @@ static void gicv3_redist_update_noirqset(GICv3CPUState 
*cs)
             if (!(pend & (1 << i))) {
                 continue;
             }
-            prio = cs->gicr_ipriorityr[i];
-            if (irqbetter(cs, i, prio)) {
+            has_superprio = gicv3_get_priority(cs, true, &prio, i);
+            if (irqbetter(cs, i, prio, has_superprio)) {
                 cs->hppi.irq = i;
                 cs->hppi.prio = prio;
+                cs->hppi.superprio = has_superprio;
                 seenbetter = true;
             }
         }
@@ -168,9 +214,11 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs)
     if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable &&
         (cs->gic->gicd_ctlr & GICD_CTLR_EN_GRP1NS) &&
         (cs->hpplpi.prio != 0xff)) {
-        if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) {
+        if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio,
+                      cs->hpplpi.superprio)) {
             cs->hppi.irq = cs->hpplpi.irq;
             cs->hppi.prio = cs->hpplpi.prio;
+            cs->hppi.superprio = cs->hpplpi.superprio;
             cs->hppi.grp = cs->hpplpi.grp;
             seenbetter = true;
         }
@@ -213,6 +261,7 @@ static void gicv3_update_noirqset(GICv3State *s, int start, 
int len)
     int i;
     uint8_t prio;
     uint32_t pend = 0;
+    bool has_superprio = false;
 
     assert(start >= GIC_INTERNAL);
     assert(len > 0);
@@ -240,10 +289,11 @@ static void gicv3_update_noirqset(GICv3State *s, int 
start, int len)
              */
             continue;
         }
-        prio = s->gicd_ipriority[i];
-        if (irqbetter(cs, i, prio)) {
+        has_superprio = gicv3_get_priority(cs, false, &prio, i);
+        if (irqbetter(cs, i, prio, has_superprio)) {
             cs->hppi.irq = i;
             cs->hppi.prio = prio;
+            cs->hppi.superprio = has_superprio;
             cs->seenbetter = true;
         }
     }
@@ -293,6 +343,7 @@ void gicv3_full_update_noirqset(GICv3State *s)
 
     for (i = 0; i < s->num_cpu; i++) {
         s->cpu[i].hppi.prio = 0xff;
+        s->cpu[i].hppi.superprio = false;
     }
 
     /* Note that we can guarantee that these functions will not
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 2d2cea6858..822d99d8b4 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -498,8 +498,11 @@ static void arm_gicv3_common_reset_hold(Object *obj)
         memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));
 
         cs->hppi.prio = 0xff;
+        cs->hppi.superprio = false;
         cs->hpplpi.prio = 0xff;
+        cs->hpplpi.superprio = false;
         cs->hppvlpi.prio = 0xff;
+        cs->hppvlpi.superprio = false;
 
         /* State in the CPU interface must *not* be reset here, because it
          * is part of the CPU's reset domain, not the GIC device's.
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 7a16a058b1..4118c2f297 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -120,6 +120,7 @@ static void update_for_one_lpi(GICv3CPUState *cs, int irq,
         ((prio == hpp->prio) && (irq <= hpp->irq))) {
         hpp->irq = irq;
         hpp->prio = prio;
+        hpp->superprio = false;
         /* LPIs and vLPIs are always non-secure Grp1 interrupts */
         hpp->grp = GICV3_G1NS;
     }
@@ -156,6 +157,7 @@ static void update_for_all_lpis(GICv3CPUState *cs, uint64_t 
ptbase,
     int i, bit;
 
     hpp->prio = 0xff;
+    hpp->superprio = false;
 
     for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) {
         address_space_read(as, ptbase + i, MEMTXATTRS_UNSPECIFIED, &pend, 1);
@@ -241,6 +243,7 @@ static void gicv3_redist_update_vlpi_only(GICv3CPUState *cs)
 
     if (!FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID)) {
         cs->hppvlpi.prio = 0xff;
+        cs->hppvlpi.superprio = false;
         return;
     }
 
-- 
2.34.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]