[RFC PATCH v7 16/23] hw/intc: Enable FEAT_GICv3_NMI Feature

[Jinjie Ruan]

Added properties to enable FEAT_GICv3_NMI feature, setup distributor
and redistributor registers to indicate NMI support.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
v4:
- Add Reviewed-by.
---
 hw/intc/arm_gicv3_common.c         | 1 +
 hw/intc/arm_gicv3_dist.c           | 2 ++
 hw/intc/gicv3_internal.h           | 1 +
 include/hw/intc/arm_gicv3_common.h | 1 +
 4 files changed, 5 insertions(+)

diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index c52f060026..2d2cea6858 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -569,6 +569,7 @@ static Property arm_gicv3_common_properties[] = {
     DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
     DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
     DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
+    DEFINE_PROP_BOOL("has-nmi", GICv3State, nmi_support, 0),
     DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
     /*
      * Compatibility property: force 8 bits of physical priority, even
diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index 9739404e35..c4e28d209a 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -412,6 +412,7 @@ static bool gicd_readl(GICv3State *s, hwaddr offset,
          *                      by GICD_TYPER.IDbits)
          * MBIS == 0 (message-based SPIs not supported)
          * SecurityExtn == 1 if security extns supported
+         * NMI = 1 if Non-maskable interrupt property is supported
          * CPUNumber == 0 since for us ARE is always 1
          * ITLinesNumber == (((max SPI IntID + 1) / 32) - 1)
          */
@@ -425,6 +426,7 @@ static bool gicd_readl(GICv3State *s, hwaddr offset,
         bool dvis = s->revision >= 4;
 
         *data = (1 << 25) | (1 << 24) | (dvis << 18) | (sec_extn << 10) |
+            (s->nmi_support << GICD_TYPER_NMI_SHIFT) |
             (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) |
             (0xf << 19) | itlinesnumber;
         return true;
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index a1fc34597e..8d793243f4 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -70,6 +70,7 @@
 #define GICD_CTLR_E1NWF             (1U << 7)
 #define GICD_CTLR_RWP               (1U << 31)
 
+#define GICD_TYPER_NMI_SHIFT           9
 #define GICD_TYPER_LPIS_SHIFT          17
 
 /* 16 bits EventId */
diff --git a/include/hw/intc/arm_gicv3_common.h 
b/include/hw/intc/arm_gicv3_common.h
index df4380141d..16c5fa7256 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -251,6 +251,7 @@ struct GICv3State {
     uint32_t num_irq;
     uint32_t revision;
     bool lpi_enable;
+    bool nmi_support;
     bool security_extn;
     bool force_8bit_prio;
     bool irq_reset_nonsecure;
-- 
2.34.1