This test runs U-Boot on the Raspberry Pi 3.
It is very simple and fast:
$ avocado --show=app,console run -t raspi3 -t u-boot tests/acceptance/
JOB LOG : avocado/job-results/job-2020-01-20T23.40-2424777/job.log
(1/1)
tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_aarch64_raspi3_uboot:
console: MMC: mmc@7e202000: 0, sdhci@7e300000: 1
console: Loading Environment from FAT... WARNING at
drivers/mmc/bcm2835_sdhost.c:410/bcm2835_send_command()!
console: WARNING at drivers/mmc/bcm2835_sdhost.c:410/bcm2835_send_command()!
console: Card did not respond to voltage select!
console: In: serial
console: Out: vidconsole
console: Err: vidconsole
console: Net: No ethernet found.
console: starting USB...
console: Bus usb@7e980000: Port not available.
console: Hit any key to stop autoboot: 0
console: U-Boot>
console: U-Boot>
console: U-Boot> bdinfo
console: arch_number = 0x0000000000000000
console: boot_params = 0x0000000000000100
console: DRAM bank = 0x0000000000000000
console: -> start = 0x0000000000000000
console: -> size = 0x000000003c000000
console: baudrate = 115200 bps
console: TLB addr = 0x000000003bff0000
console: relocaddr = 0x000000003bf57000
console: reloc off = 0x000000003bed7000
console: irq_sp = 0x000000003bb52dd0
console: sp start = 0x000000003bb52dd0
console: FB base = 0x0000000000000000
console: Early malloc usage: 7b0 / 2000
console: fdt_blob = 0x000000003bfbf200
console: U-Boot> version
console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000)
console: gcc (Debian 9.2.1-22) 9.2.1 20200104
console: GNU ld (GNU Binutils for Debian) 2.33.1
console: U-Boot> reset
console: resetting ...
PASS (1.79 s)
U-Boot is built by the Debian project, see:
https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
tests/acceptance/boot_linux_console.py | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py
b/tests/acceptance/boot_linux_console.py
index 682b801b4f..22b360118d 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -513,6 +513,31 @@ class BootLinuxConsole(Test):
exec_command_and_wait_for_pattern(self, 'version', 'U-Boot')
exec_command_and_wait_for_pattern(self, 'reset', 'resetting ...')
+ def test_aarch64_raspi3_uboot(self):
+ """
+ :avocado: tags=arch:aarch64
+ :avocado: tags=machine:raspi3
+ :avocado: tags=u-boot
+ """
+ deb_url = ('https://snapshot.debian.org/archive/debian/'
+ '20200108T145233Z/pool/main/u/u-boot/'
+ 'u-boot-rpi_2020.01%2Bdfsg-1_arm64.deb')
+ deb_hash = 'f394386e02469d52f2eb3c07a2325b1c95aeb00b'
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ uboot_path = '/usr/lib/u-boot/rpi_3/u-boot.bin'
+ uboot_path = self.extract_from_deb(deb_path, uboot_path)
+
+ self.vm.set_console(console_index=1)
+ self.vm.add_args('-kernel', uboot_path,
+ '-no-reboot')
+ self.vm.launch()
+ interrupt_interactive_console_until_pattern(self,
+ 'Hit any key to stop autoboot:',
+ 'Config file not found')
+ exec_command_and_wait_for_pattern(self, 'bdinfo', 'U-Boot')
+ exec_command_and_wait_for_pattern(self, 'version', 'U-Boot')
+ exec_command_and_wait_for_pattern(self, 'reset', 'resetting ...')
+
def test_s390x_s390_ccw_virtio(self):
"""
:avocado: tags=arch:s390x