qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v4 5/7] tests/boot_linux_console: Test booting U-Boot on the


From: Philippe Mathieu-Daudé
Subject: Re: [PATCH v4 5/7] tests/boot_linux_console: Test booting U-Boot on the Raspberry Pi 2
Date: Mon, 27 Jan 2020 17:09:02 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.2.2

On 1/27/20 5:02 PM, Thomas Huth wrote:
On 21/01/2020 00.51, Philippe Mathieu-Daudé wrote:
This test runs U-Boot on the Raspberry Pi 2.
It is very simple and fast:

   $ avocado --show=app,console run -t raspi2 -t u-boot tests/acceptance/
   JOB LOG    : avocado/job-results/job-2020-01-20T23.40-2424777/job.log
    (1/1) 
tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot:
   console: MMC:   sdhci@7e300000: 0
   console: Loading Environment from FAT... Card did not respond to voltage 
select!
   console: In:    serial
   console: Out:   vidconsole
   console: Err:   vidconsole
   console: Net:   No ethernet found.
   console: starting USB...
   console: USB0:   Port not available.
   console: Hit any key to stop autoboot:  0
   console: U-Boot>
   console: U-Boot> bdinfo
   console: arch_number = 0x00000000
   console: boot_params = 0x00000100
   console: DRAM bank   = 0x00000000
   console: -> start    = 0x00000000
   console: -> size     = 0x3c000000
   console: baudrate    = 115200 bps
   console: TLB addr    = 0x3bff0000
   console: relocaddr   = 0x3bf64000
   console: reloc off   = 0x3bf5c000
   console: irq_sp      = 0x3bb5fec0
   console: sp start    = 0x3bb5feb0
   console: Early malloc usage: 2a4 / 400
   console: fdt_blob    = 0x3bfbdfb0
   console: U-Boot> version
   console: U-Boot 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000)
   console: gcc (Debian 8.3.0-7) 8.3.0
   console: GNU ld (GNU Binutils for Debian) 2.31.1
   console: U-Boot> reset
   console: resetting ...
   PASS (0.46 s)

U-Boot is built by the Debian project, see:
https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot

Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
  tests/acceptance/boot_linux_console.py | 28 ++++++++++++++++++++++++++
  1 file changed, 28 insertions(+)

diff --git a/tests/acceptance/boot_linux_console.py 
b/tests/acceptance/boot_linux_console.py
index e40b84651b..682b801b4f 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py

The file is called boot_*linux*_console.py ... so shouldn't tests that
don't use Linux rather go into another file instead?
Either machine_arm_raspi.py or maybe a boot_firmware_console.py file?

Yes I have a series ready splitting boot_linux_console.py per machines (as suggested machine_arm_raspi.py) not for consistency with fw/linux but because I'm tired of fixing conflicts while rebasing since months.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]