[Qemu-devel] [PATCH v3 16/28] riscv: sifive_u: Add PRCI block to the SoC

[Bin Meng]

Add PRCI mmio base address and size mappings to sifive_u machine,
and generate the corresponding device tree node.

Signed-off-by: Bin Meng <address@hidden>
---

Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c         | 21 ++++++++++++++++++++-
 include/hw/riscv/sifive_u.h |  1 +
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index f2b711a..c0b7498 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -9,6 +9,7 @@
  * 0) UART
  * 1) CLINT (Core Level Interruptor)
  * 2) PLIC (Platform Level Interrupt Controller)
+ * 3) PRCI (Power, Reset, Clock, Interrupt)
  *
  * This board currently generates devicetree dynamically that indicates at 
least
  * two harts and up to five harts.
@@ -42,6 +43,7 @@
 #include "hw/riscv/sifive_clint.h"
 #include "hw/riscv/sifive_uart.h"
 #include "hw/riscv/sifive_u.h"
+#include "hw/riscv/sifive_u_prci.h"
 #include "hw/riscv/boot.h"
 #include "chardev/char.h"
 #include "sysemu/arch_init.h"
@@ -60,6 +62,7 @@ static const struct MemmapEntry {
     [SIFIVE_U_MROM] =     {     0x1000,    0x11000 },
     [SIFIVE_U_CLINT] =    {  0x2000000,    0x10000 },
     [SIFIVE_U_PLIC] =     {  0xc000000,  0x4000000 },
+    [SIFIVE_U_PRCI] =     { 0x10000000,     0x1000 },
     [SIFIVE_U_UART0] =    { 0x10010000,     0x1000 },
     [SIFIVE_U_UART1] =    { 0x10011000,     0x1000 },
     [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
@@ -76,7 +79,7 @@ static void create_fdt(SiFiveUState *s, const struct 
MemmapEntry *memmap,
     uint32_t *cells;
     char *nodename;
     char ethclk_names[] = "pclk\0hclk\0tx_clk";
-    uint32_t plic_phandle, ethclk_phandle, phandle = 1;
+    uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
     uint32_t hfclk_phandle, rtcclk_phandle;
 
     fdt = s->fdt = create_device_tree(&s->fdt_size);
@@ -183,6 +186,21 @@ static void create_fdt(SiFiveUState *s, const struct 
MemmapEntry *memmap,
     g_free(cells);
     g_free(nodename);
 
+    prci_phandle = phandle++;
+    nodename = g_strdup_printf("/soc/clock-controller@%lx",
+        (long)memmap[SIFIVE_U_PRCI].base);
+    qemu_fdt_add_subnode(fdt, nodename);
+    qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
+    qemu_fdt_setprop_cells(fdt, nodename, "clocks",
+        hfclk_phandle, rtcclk_phandle);
+    qemu_fdt_setprop_cells(fdt, nodename, "reg",
+        0x0, memmap[SIFIVE_U_PRCI].base,
+        0x0, memmap[SIFIVE_U_PRCI].size);
+    qemu_fdt_setprop_string(fdt, nodename, "compatible",
+        "sifive,fu540-c000-prci");
+    g_free(nodename);
+
     plic_phandle = phandle++;
     cells =  g_new0(uint32_t, s->soc.cpus.num_harts * 4 - 2);
     for (cpu = 0; cpu < s->soc.cpus.num_harts; cpu++) {
@@ -422,6 +440,7 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, 
Error **errp)
     sifive_clint_create(memmap[SIFIVE_U_CLINT].base,
         memmap[SIFIVE_U_CLINT].size, ms->smp.cpus,
         SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
+    sifive_u_prci_create(memmap[SIFIVE_U_PRCI].base);
 
     for (i = 0; i < SIFIVE_U_PLIC_NUM_SOURCES; i++) {
         plic_gpios[i] = qdev_get_gpio_in(DEVICE(s->plic), i);
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 2b57ffc..e318ecb 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -51,6 +51,7 @@ enum {
     SIFIVE_U_MROM,
     SIFIVE_U_CLINT,
     SIFIVE_U_PLIC,
+    SIFIVE_U_PRCI,
     SIFIVE_U_UART0,
     SIFIVE_U_UART1,
     SIFIVE_U_DRAM,
-- 
2.7.4