Re: [Qemu-devel] [PATCH 18/47] hw/arm/Kconfig: Add ARM Kconfig

[Paolo Bonzini]

Il 26/08/2013 00:58, Ákos Kovács ha scritto:
> Signed-off-by: Ákos Kovács <address@hidden>
> ---
>  hw/arm/Kconfig |  235 
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 235 insertions(+)
>  create mode 100644 hw/arm/Kconfig
> 
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> new file mode 100644
> index 0000000..c72b949
> --- /dev/null
> +++ b/hw/arm/Kconfig
> @@ -0,0 +1,235 @@
> +config ARM
> +    bool
> +#    select ARM_NVIC
> +    default y

Why is this item needed?

Paolo

> +menu "ARM" 
> +    config EXYNOS4
> +        bool "Samsung Exynos4210 SoC"
> +        select A9SCU # snoop controll unit
> +        select USB_EHCI
> +        select LAN9118
> +        select PL310 # cache controller
> +        select PCI
> +        select ARM_GIC
> +        select ARM_NVIC
> +        select ARM9MPCORE
> +        select ARM_MPTIMER
> +        default y
> +
> +    config HIGHBANK
> +        bool "Calxeda Highbank SoC"
> +        select A9SCU # snoop controll unit
> +        select AHCI
> +        select PL011 # UART
> +        select PL022 # Serial port
> +        select PL031 # RTC
> +        select PL061 # GPIO
> +        select PL310 # cache controller
> +        select XGMAC # ethernet
> +        select ARM_TIMER # sp804
> +        select ARM_NVIC
> +        select ARM_MPTIMER
> +        select ARM9MPCORE
> +        select PCI
> +        default y
> +
> +    config INTEGRATORCP
> +        bool "ARM Integrator CP"
> +        select SMC91C111
> +        select ARM_TIMER
> +        select PL011 # UART
> +        select PL031 # RTC
> +        select PL050 # keyboard/mouse
> +        select PL110 # pl111 LCD controller
> +        select PL181 # display
> +        select PCI
> +        default y
> +
> +    config KZM
> +        bool "Kzm"
> +        select SERIAL
> +        select IMX
> +        select LAN9118
> +        select PCI
> +        default y
> +
> +    config MUSICPAL
> +        bool "Marvell MV88W8618 / Freecom MusicPal"
> +        select PFLASH_CFI02
> +        select PTIMER
> +        select PCI
> +        select BITBANG_I2C
> +        select MARVELL_88W8618
> +        select WM8750
> +        select SERIAL
> +        default y
> +
> +    config OMAP
> +        bool "Texas Instruments Open Multimedia Applications Platform"
> +        select SERIAL
> +        select PFLASH_CFI01
> +        select PCI
> +        default y
> +
> +    config NSERIES
> +        bool "Nokia N-Series tablets"
> +        select TMP105   # tempature sensor
> +        select BLIZZARD # LCD/TV controller
> +        select ONENAND 
> +        select TSC210X  # touchscreen/sensors/audio
> +        select TSC2005  # touchscreen/sensors/keypad
> +        select LM832X   # GPIO keyboard chip
> +        select TWL92230 # energy-management
> +        depends on OMAP
> +        default y
> +
> +    config PALM
> +        bool "PalmOne PDAs"
> +        select TSC210X
> +        depends on OMAP
> +        default y
> +
> +    config STELLARIS
> +        bool
> +        select PL011 # UART
> +        select PL022 # Serial port
> +        select PL061 # GPIO
> +        select STELLARIS_INPUT
> +        select STELLARIS_ENET # ethernet
> +        select SSD0303 # OLED display
> +        select SSD0323 # OLED display
> +        select SSI_SD
> +        default y    # for armv7m_nvic_*
> +
> +    config REALVIEW
> +        bool "ARM Realview baseboard"
> +        # networking
> +        select SMC91C111
> +        select LAN9118
> +        select RTL8139_PCI
> +
> +        select VERSATILE_PCI
> +        select WM8750 # audio codec
> +        select PL011  # UART
> +        select PL041  # audio codec
> +        select PL050  # keyboard/mouse
> +        select PL061  # GPIO
> +        select PL080  # DMA controller
> +        select VERSATILE_I2C
> +        select DS1338 # I2C RTC+NVRAM
> +        select USB_OHCI
> +        select ARM_GIC
> +        select ARM_MPTIMER
> +        select ARM15MPCORE
> +        select ARM11MPCORE
> +        select ARM9MPCORE
> +    
> +    config VERSATILEPB
> +        bool "ARM Versatile platform"
> +        select PFLASH_CFI01
> +        select PL031  # RTC
> +        select PL050  # keyboard/mouse
> +        select PL080  # DMA controller
> +        select PL181  # display
> +        select PL190  # Vector PIC
> +        select ARM_TIMER # sp804
> +        select USB_OHCI
> +        select LSI_SCSI_PCI
> +        select REALVIEW
> +        default y
> +
> +    config VXPRESS
> +        bool "ARM Versatile Express"
> +        select PFLASH_CFI01
> +        select LAN9118
> +        select PL011 # UART
> +        select PL031  # RTC
> +        select PL041 # audio codec
> +        select PL110 # pl111 LCD controller
> +        select PL181  # display
> +        select PL310 # cache controller
> +        select A9SCU # snoop controll unit
> +        select ARM_TIMER # sp804
> +        select ARM_MPTIMER
> +        select ARM15MPCORE
> +        select ARM9MPCORE
> +        select REALVIEW
> +        default y
> +
> +    config ZYNQ
> +        bool "Xilinx Zynq Baseboard"
> +        select ARM9MPCORE
> +        select CADENCE # UART
> +        select PCI
> +        select PFLASH_CFI02
> +        select SDHCI
> +        select USB_EHCI
> +        select XILINX # UART
> +        select XILINX_SPI
> +        select XILINX_SPISS
> +        default y
> +
> +    config PXA2XX
> +        bool "Intel XScale PXA255/270"
> +        select SERIAL
> +        select PCI
> +        select USB_OHCI
> +        select SSI
> +        default y
> +
> +    config GUMSTIX
> +        bool "Gumstix platform"
> +        select PFLASH_CFI01
> +        select SMC91C111
> +        depends on PXA2XX
> +        default y
> +
> +    config TOSA
> +        bool "PXA255 Sharp Zaurus SL-6000 PDA platform"
> +        select ZAURUS  # scoop
> +        select MICRODRIVE
> +        depends on PXA2XX
> +        default y
> +
> +    config MAINSTONE
> +        bool "PXA270-based Intel Mainstone"
> +        depends on PXA2XX
> +        select PFLASH_CFI01
> +        select SMC91C111
> +        default y
> +
> +    config SPITZ
> +        bool "PXA270-based Clamshell PDA platforms"
> +        select ADS7846 # display
> +        select MAX111X # A/D converter
> +        select WM8750  # audio codec
> +        select MAX7310 # GPIO expander
> +        select ZAURUS  # scoop
> +        select NAND    # memory
> +        select ECC     # Error-correcting for NAND
> +        select MICRODRIVE
> +        depends on PXA2XX
> +        default y
> +
> +    config Z2
> +        bool "Zipit Z2"
> +        select PFLASH_CFI01
> +        select WM8750
> +        select PL011 # UART
> +        depends on PXA2XX
> +        default y
> +
> +    config STRONGARM
> +       bool 
> +       select PXA2XX
> +
> +    config COLLIE
> +        bool "Sharp Zaurus SL-5500"
> +        select PFLASH_CFI01
> +        select ZAURUS  # scoop
> +        select STRONGARM
> +        default y
> +        help
> +            SA-1110-based Sharp Zaurus SL-5500 platform.
> +endmenu
>