Re: [PATCH v2 2/2] hw: m25p80: add tests for write protect

[Thomas Huth]

On 09/06/2022 05.13, Iris Chen wrote:
> Signed-off-by: Iris Chen <irischenlj@fb.com>
> ---
> Include the tests in a separate patch. Using qtest_set_irq_in() as per review.
>
>   tests/qtest/aspeed_smc-test.c | 60 +++++++++++++++++++++++++++++++++++
>   1 file changed, 60 insertions(+)
>
> diff --git a/tests/qtest/aspeed_smc-test.c b/tests/qtest/aspeed_smc-test.c
> index c5d97d4410..7786addfb8 100644
> --- a/tests/qtest/aspeed_smc-test.c
> +++ b/tests/qtest/aspeed_smc-test.c
> @@ -392,6 +392,64 @@ static void test_read_status_reg(void)
>       flash_reset();
>   }
>   
> +static void test_status_reg_write_protection(void)
> +{
> +    uint8_t r;
> +
> +    spi_conf(CONF_ENABLE_W0);
> +
> +    /* default case: WP# is high and SRWD is low -> status register writable */
> +    spi_ctrl_start_user();
> +    writeb(ASPEED_FLASH_BASE, WREN);
> +    /* test ability to write SRWD */
> +    writeb(ASPEED_FLASH_BASE, WRSR);
> +    writeb(ASPEED_FLASH_BASE, SRWD);
> +    writeb(ASPEED_FLASH_BASE, RDSR);
> +    r = readb(ASPEED_FLASH_BASE);
> +    spi_ctrl_stop_user();
> +    g_assert_cmphex(r & SRWD, ==, SRWD);
> +
> +    /* WP# high and SRWD high -> status register writable */
> +    spi_ctrl_start_user();
> +    writeb(ASPEED_FLASH_BASE, WREN);
> +    /* test ability to write SRWD */
> +    writeb(ASPEED_FLASH_BASE, WRSR);
> +    writeb(ASPEED_FLASH_BASE, 0);
> +    writeb(ASPEED_FLASH_BASE, RDSR);
> +    r = readb(ASPEED_FLASH_BASE);
> +    spi_ctrl_stop_user();
> +    g_assert_cmphex(r & SRWD, ==, 0);
> +
> +    /* WP# low and SRWD low -> status register writable */
> +    qtest_set_irq_in(global_qtest,
> +                     "/machine/soc/fmc/ssi.0/child[0]", "WP#", 0, 0);
> +    spi_ctrl_start_user();
> +    writeb(ASPEED_FLASH_BASE, WREN);
> +    /* test ability to write SRWD */
> +    writeb(ASPEED_FLASH_BASE, WRSR);
> +    writeb(ASPEED_FLASH_BASE, SRWD);
> +    writeb(ASPEED_FLASH_BASE, RDSR);
> +    r = readb(ASPEED_FLASH_BASE);
> +    spi_ctrl_stop_user();
> +    g_assert_cmphex(r & SRWD, ==, SRWD);
> +
> +    /* WP# low and SRWD high -> status register NOT writable */
> +    spi_ctrl_start_user();
> +    writeb(ASPEED_FLASH_BASE, WREN);
> +    /* test ability to write SRWD */
> +    writeb(ASPEED_FLASH_BASE, WRSR);
> +    writeb(ASPEED_FLASH_BASE, 0);
> +    writeb(ASPEED_FLASH_BASE, RDSR);
> +    r = readb(ASPEED_FLASH_BASE);
> +    spi_ctrl_stop_user();
> +    /* write is not successful */
> +    g_assert_cmphex(r & SRWD, ==, SRWD);
> +
> +    qtest_set_irq_in(global_qtest,
> +                     "/machine/soc/fmc/ssi.0/child[0]", "WP#", 0, 1);
> +    flash_reset();
> +}

FWIW, I'd prefer if we could use qtest_writeb / qtest_readb for new code 
instead of writeb / readb, but well, the whole file is already written that 
way, so this is only "consistent" ... so:

Acked-by: Thomas Huth <thuth@redhat.com>