[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection
From: |
Iris Chen |
Subject: |
[PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection |
Date: |
Wed, 8 Jun 2022 20:13:19 -0700 |
From: Iris Chen <irischenlj@gmail.com>
Signed-off-by: Iris Chen <irischenlj@gmail.com>
---
Addressed all comments from V1. The biggest change: removed
object_class_property_add.
hw/block/m25p80.c | 37 +++++++++++++++++++++++++++++++++++
tests/qtest/aspeed_smc-test.c | 2 ++
2 files changed, 39 insertions(+)
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 81ba3da4df..1a20bd55d4 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -27,12 +27,14 @@
#include "hw/qdev-properties.h"
#include "hw/qdev-properties-system.h"
#include "hw/ssi/ssi.h"
+#include "hw/irq.h"
#include "migration/vmstate.h"
#include "qemu/bitops.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
+#include "qapi/visitor.h"
#include "trace.h"
#include "qom/object.h"
@@ -472,11 +474,13 @@ struct Flash {
uint8_t spansion_cr2v;
uint8_t spansion_cr3v;
uint8_t spansion_cr4v;
+ bool wp_level;
bool write_enable;
bool four_bytes_address_mode;
bool reset_enable;
bool quad_enable;
bool aai_enable;
+ bool status_register_write_disabled;
uint8_t ear;
int64_t dirty_page;
@@ -723,6 +727,21 @@ static void complete_collecting_data(Flash *s)
flash_erase(s, s->cur_addr, s->cmd_in_progress);
break;
case WRSR:
+ /*
+ * If WP# is low and status_register_write_disabled is high,
+ * status register writes are disabled.
+ * This is also called "hardware protected mode" (HPM). All other
+ * combinations of the two states are called "software protected mode"
+ * (SPM), and status register writes are permitted.
+ */
+ if ((s->wp_level == 0 && s->status_register_write_disabled)
+ || !s->write_enable) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "M25P80: Status register write is disabled!\n");
+ break;
+ }
+ s->status_register_write_disabled = extract32(s->data[0], 7, 1);
+
switch (get_man(s)) {
case MAN_SPANSION:
s->quad_enable = !!(s->data[1] & 0x02);
@@ -1195,6 +1214,8 @@ static void decode_new_cmd(Flash *s, uint32_t value)
case RDSR:
s->data[0] = (!!s->write_enable) << 1;
+ s->data[0] |= (!!s->status_register_write_disabled) << 7;
+
if (get_man(s) == MAN_MACRONIX || get_man(s) == MAN_ISSI) {
s->data[0] |= (!!s->quad_enable) << 6;
}
@@ -1484,6 +1505,14 @@ static uint32_t m25p80_transfer8(SSIPeripheral *ss,
uint32_t tx)
return r;
}
+static void m25p80_write_protect_pin_irq_handler(void *opaque, int n, int
level)
+{
+ Flash *s = M25P80(opaque);
+ /* WP# is just a single pin. */
+ assert(n == 0);
+ s->wp_level = !!level;
+}
+
static void m25p80_realize(SSIPeripheral *ss, Error **errp)
{
Flash *s = M25P80(ss);
@@ -1515,12 +1544,18 @@ static void m25p80_realize(SSIPeripheral *ss, Error
**errp)
s->storage = blk_blockalign(NULL, s->size);
memset(s->storage, 0xFF, s->size);
}
+
+ qdev_init_gpio_in_named(DEVICE(s),
+ m25p80_write_protect_pin_irq_handler, "WP#", 1);
}
static void m25p80_reset(DeviceState *d)
{
Flash *s = M25P80(d);
+ s->wp_level = true;
+ s->status_register_write_disabled = false;
+
reset_memory(s);
}
@@ -1601,6 +1636,8 @@ static const VMStateDescription vmstate_m25p80 = {
VMSTATE_UINT8(needed_bytes, Flash),
VMSTATE_UINT8(cmd_in_progress, Flash),
VMSTATE_UINT32(cur_addr, Flash),
+ VMSTATE_BOOL(wp_level, Flash),
+ VMSTATE_BOOL(status_register_write_disabled, Flash),
VMSTATE_BOOL(write_enable, Flash),
VMSTATE_BOOL(reset_enable, Flash),
VMSTATE_UINT8(ear, Flash),
diff --git a/tests/qtest/aspeed_smc-test.c b/tests/qtest/aspeed_smc-test.c
index ec233315e6..c5d97d4410 100644
--- a/tests/qtest/aspeed_smc-test.c
+++ b/tests/qtest/aspeed_smc-test.c
@@ -56,7 +56,9 @@ enum {
BULK_ERASE = 0xc7,
READ = 0x03,
PP = 0x02,
+ WRSR = 0x1,
WREN = 0x6,
+ SRWD = 0x80,
RESET_ENABLE = 0x66,
RESET_MEMORY = 0x99,
EN_4BYTE_ADDR = 0xB7,
--
2.30.2
- [PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection,
Iris Chen <=
- [PATCH v2 2/2] hw: m25p80: add tests for write protect, Iris Chen, 2022/06/08
- Re: [PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection, Cédric Le Goater, 2022/06/09
- Re: [PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection, Francisco Iglesias, 2022/06/09
- Re: [PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection, Peter Delevoryas, 2022/06/09
- Re: [PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection, Dan Zhang, 2022/06/14
- Re: [PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection, Dan Zhang, 2022/06/14
- Re: [PATCH v2 1/2] hw: m25p80: add WP# pin and SRWD bit for write protection, Cédric Le Goater, 2022/06/14
- [PATCH] hw:w25p80: Add STATE_STANDBY to handle incorrect command, Dan Zhang, 2022/06/14
- Re: [PATCH] hw:w25p80: Add STATE_STANDBY to handle incorrect command, Dan Zhang, 2022/06/14