Hi,
The GCS shows an estimated wind of 7m/s, which is almost half of your
flight speed, so the evolution of the desired roll looks normal to me on
the first plot.
On the second one, everything is normal, except the part where the
desired roll stays constant a few seconds after entering home mode.
Unfortunately, I don't have an explanation for this right now. Could you
try to make a simulation of your flight to see if the behavior is the
same or not (it is working as expected for me) ?
Gautier
Le 23/07/2014 18:23, afishindouban a écrit :
> someone can have a look and give me some guide?
>
> <http://lists.paparazziuav.org/file/n15861/standby_tuning.png>
>
> This is standby roll and desired roll, why the desired roll is so trembled
> and unstable, wind is one reason, I think other is some parameter is not
> right. maybe course pgain is too big ? or roll pgain, roll rate pgain has
> problem? also you can see always between desired and actully roll there is
> about 5 degree gap, what is the reason for that?
>
>
> <http://lists.paparazziuav.org/file/n15861/last.png>
>
> Here is the roll analyse of the last phase before it kill and crash. i saw
> roll is following desired roll, but looks like the nav course loop give a
> wrong result?
>
> Please some one can have a look at it. thank you so much
>
> Kevin
>
>
>
> --
> View this message in context: http://lists.paparazziuav.org/one-crash-today-reach-MAX-DIST-FROM-HOME-PID-problem-tp15846p15861.html
> Sent from the paparazzi-devel mailing list archive at Nabble.com.
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel