If I remember well when I connect the back magic prob I get ttyACM0
and ttyACM1. Then when I plug the superbit RF I get the ttyACM2, and
not a TTYUSB*.
Sent from my crane.
On 23-06-14 14:23, Prabir Guha wrote:
Hello All:
I am very new to paparazzi auto pilot (Lisa/S). I am running
paparazzi GCS on Ubuntu 12.10. When I plug-in the Superbit USBRF
radio dongle to the usb port, the device is recognized by the kernel,
but I do not see a /dev/ttyUSB0. So when I try to execute session for
Flight address@hidden, I get the " Failure opening serial device:
fd < 0 (/dev/ttyUSB0) " error. I am sure I am missing a device
driver somewhere! The blackmagic JTAG probe works fine though and I
do see the /dev/ttyACM0 device the blackmagic probe is connected to
the usb port.
Can one of you gurus let me know what I need to do to get the
/dev/ttyUSB0 device show up when the Superbit USBRF Radio dongle to
the usb port ?
Thank you so much for your help in advance.
Regards,
--Prabir
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel