Re: [Paparazzi-devel] Superbit USBRF Radio Dongle issue: Failure opening serial device: fd < 0 (/dev/ttyUSB0)

[karlito]

If I remember well when I connect the back magic prob I get ttyACM0 and 
ttyACM1. Then when I plug the superbit RF I get the ttyACM2, and not a 
TTYUSB*.

Sent from my crane.
On 23-06-14 14:23, Prabir Guha wrote:
> Hello All:
>
> I am very new to paparazzi auto pilot (Lisa/S). I am running paparazzi 
> GCS on Ubuntu 12.10. When I plug-in the Superbit USBRF radio dongle to 
> the usb port, the device is recognized by the kernel, but I do not see 
> a /dev/ttyUSB0. So when I try to execute session for Flight 
> address@hidden, I get the " Failure opening serial device: fd < 0 
> (/dev/ttyUSB0) " error.  I am sure I am missing a device driver 
> somewhere!  The blackmagic JTAG probe works fine though and I do see 
> the /dev/ttyACM0 device the blackmagic probe is connected to the usb 
> port.
>
> Can one of you gurus let me know what I need to do to get the 
> /dev/ttyUSB0 device show up when the Superbit USBRF Radio dongle to 
> the usb port ?
>
> Thank you so much for your help in advance.
>
> Regards,
>
> --Prabir
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel