Re: [Paparazzi-devel] operation / flashing lisa/m

[Felix Ruess]

Hi Oswald,

if you want to flash via USB bootloader, there is currently no way around this that I know of..

But you could instead flash via JTAG or SWD (e.g. using FlossJTAG or BlackMagicProbe).

I can really recommend the BlackMagicProbe, it's great for development and debugging.

Cheers, Felix

On Tue, Jun 10, 2014 at 12:08 PM, Oswald Berthold <address@hidden> wrote:

hi all again,

a few questions regarding flashing of the AP board:

flashing seems a bit awkward, the way i do it now is
 - unplug UBEC from servo ports
 - plug in micro USB
 - upload firmware
 - unplug USB
 - replug UBEC

is there a way of connecting both USB and external power supply to lisa?
i have the POWER_FROM_SERVO jumper closed. is there a way for getting
the AP into upload mode with a soft command, that is, go from normal
operation into bootloader mode?


regards, opt

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel