Re: [Paparazzi-devel] error while buiding code for quad lisa/m

[evan igor]

sorry Felix for bothering you but i deleted the paparazzi folder and re install again new one v5 also and everything finished ok but when i'm trying to upload aiframe to liza/m the following error message.

make[1]: Leaving directory `/home/mavel/paparazzi/sw/airborne'

cd sw/airborne; make TARGET=ap upload

make[1]: Entering directory `/home/mavel/paparazzi/sw/airborne'

/home/mavel/paparazzi/sw/ground_segment/lpc21iap/lpc21iap  /home/mavel/paparazzi/var/EasyStar_ETS/ap/ap.elf

lpc21iap v1.4

....................................................................................................

no USB device

make[1]: *** [upload] Error 1

make[1]: Leaving directory `/home/mavel/paparazzi/sw/airborne'

make: *** [ap.upload] Error 2

make: Leaving directory `/home/mavel/paparazzi'

FAILED 'make -C /home/mavel/paparazzi -f Makefile.ac AIRCRAFT=EasyStar_ETS ap.upload' with code 2

On Sun, Sep 8, 2013 at 10:20 PM, Felix Ruess <address@hidden> wrote:

There is no need to install libopencm3 separately...

Go to your paparazzi directory and run:

$ cat .git/config | grep -A 1 submodule

You should see the following as output:

[submodule "sw/ext/libopencm3"]

url = "">

--

[submodule "sw/ext/luftboot"]

url = "" href="https://github.com/paparazzi/luftboot.git" target="_blank">https://github.com/paparazzi/luftboot.git

If the url for libopencm3 is different (the old sourceforge url), then run

$ git submodule sync

and afterwards

$ make clean && make

On Sun, Sep 8, 2013 at 8:31 PM, evan igor <address@hidden> wrote:

but when i'm trying to install it independently by the following steps

$ git clone git://github.com/libopencm3/libopencm3.git

$ cd libopencm3
$ make
the following error happened 
make[1]: arm-none-eabi-gcc: Command not found
make[1]: *** [flash.o] Error 127
make: *** [lib/stm32/f0] Error 2

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel