Re: [Paparazzi-devel] error while buiding code for quad lisa/m

[evan igor]

but sorry felix i can't follow you in how to check url of sw/ext/libopencm3 submoule

On Sun, Sep 8, 2013 at 8:48 PM, evan igor <address@hidden> wrote:

thanks Felix for your response,

paparazzi v5

On Sun, Sep 8, 2013 at 3:16 PM, Felix Ruess <address@hidden> wrote:

Hi Evan,

can you please provide the paparazzi_version you are running?

Also can you please check the url used for the sw/ext/libopencm3 submoule?

cat .git/config

should contain:

[submodule "sw/ext/libopencm3"]

url = "">

If you still have the (very old) sourceforge url there instead of the github url, run:

git submodule sync

make

Cheers, Felix

On Sun, Sep 8, 2013 at 3:06 PM, evan igor <address@hidden> wrote:

after making make clean then make the following error occurred 

GENERATE /home/mavel/paparazzi/var/include/messages.h

GENERATE /home/mavel/paparazzi/var/include/messages2.h

GENERATE /home/mavel/paparazzi/var/include/ubx_protocol.h

GENERATE /home/mavel/paparazzi/var/include/mtk_protocol.h

GENERATE /home/mavel/paparazzi/var/include/xsens_protocol.h

GENERATE /home/mavel/paparazzi/var/include/dl_protocol.h

GENERATE /home/mavel/paparazzi/var/include/dl_protocol2.h

GENERATE /home/mavel/paparazzi/var/include/abi_messages.h

make -C sw/ext

fatal: Needed a single revision

Unable to find current revision in submodule path 'sw/ext/libopencm3'

make[1]: *** [update_submodules] Error 1

make: *** [ext] Error 2

On Sun, Sep 8, 2013 at 3:51 PM, Felix Ruess <address@hidden> wrote:

Hi Evan,

If you update paparazzi with a git pull (or switch to a different branch), always make sure to run the toplevel make again.

When changing between different versions (branches) you might want to run a "make clean && make" to be sure everything is properly build with the current version.

Cheers, Felix

On Sun, Sep 8, 2013 at 2:44 PM, evan igor <address@hidden> wrote:

Hi everyone,

 i found this error while building the code could anyone give recommendation

Using CC   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc

Using LD   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc

Using CP   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objcopy

Using DMP  = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objdump

Using NM   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-nm

Using SIZE = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-size

GCC version:

arm-none-eabi-gcc (Linaro GCC 4.6-2011.09-1) 4.6.2 20110908 (prerelease)

CC /home/mavel/paparazzi/var/Quad_LisaM_2/ap/mcu.o

In file included from mcu_periph/sys_time.h:192:0,

                 from mcu.c:32:

/home/mavel/paparazzi/sw/airborne/arch/stm32/mcu_periph/sys_time_arch.h:39:36: fatal error: libopencm3/cm3/systick.h: No such file or directory

compilation terminated.

make[1]: *** [/home/mavel/paparazzi/var/Quad_LisaM_2/ap/mcu.o] Error 1

make[1]: Leaving directory `/home/mavel/paparazzi/sw/airborne'

make: *** [ap.compile] Error 2

make: Leaving directory `/home/mavel/paparazzi'

FAILED 'make -C /home/mavel/paparazzi -f Makefile.ac AIRCRAFT=Quad_LisaM_2 ap.compile' with code 2

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel