Re: [Paparazzi-devel] error while buiding code for quad lisa/m

[Felix Ruess]

Hi Evan,

If you update paparazzi with a git pull (or switch to a different branch), always make sure to run the toplevel make again.

When changing between different versions (branches) you might want to run a "make clean && make" to be sure everything is properly build with the current version.

Cheers, Felix

On Sun, Sep 8, 2013 at 2:44 PM, evan igor <address@hidden> wrote:

Hi everyone,

 i found this error while building the code could anyone give recommendation

Using CC   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc

Using LD   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc

Using CP   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objcopy

Using DMP  = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objdump

Using NM   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-nm

Using SIZE = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-size

GCC version:

arm-none-eabi-gcc (Linaro GCC 4.6-2011.09-1) 4.6.2 20110908 (prerelease)

CC /home/mavel/paparazzi/var/Quad_LisaM_2/ap/mcu.o

In file included from mcu_periph/sys_time.h:192:0,

                 from mcu.c:32:

/home/mavel/paparazzi/sw/airborne/arch/stm32/mcu_periph/sys_time_arch.h:39:36: fatal error: libopencm3/cm3/systick.h: No such file or directory

compilation terminated.

make[1]: *** [/home/mavel/paparazzi/var/Quad_LisaM_2/ap/mcu.o] Error 1

make[1]: Leaving directory `/home/mavel/paparazzi/sw/airborne'

make: *** [ap.compile] Error 2

make: Leaving directory `/home/mavel/paparazzi'

FAILED 'make -C /home/mavel/paparazzi -f Makefile.ac AIRCRAFT=Quad_LisaM_2 ap.compile' with code 2

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel